PSENmag Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 824-4914
  • Fabrikantnummer 506405
  • Fabrikant Pilz
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

PSENmag Non Contact Switches, Square

The PSENmag Non-contact Switch meets the highest safety requirements offers a complete solution that is safe and economical. It is approved up to PLe of EN ISO 13849-1, SIL 3 of EN/IEC 62061 and Category 4 of EN 954-1.

Features and Benefits

Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration
Cost effective thanks to series connection
Operating distance of 3 mm or 10 mm
Extra signal contact and LED

Applications

The PSENmag safety switch is suitable for use in applications with heavy soiling, thanks to its non-contact design.

Note

Only stock nos. 744-8702 and 824-4918 have an LED.

Standards

EN954-1 (Cat 4), EN60204-1, EN60947-5-3.

Approvals

CE, cULus Listed, TÜV.

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts NO/NC
Housing Material Plastic
Connection Type M8
Switch Type Square
Range PSENmag
Terminal Type PCB Pin
Switching Distance 3 mm
IP Rating IP67
Actuator Included Yes
Dimensions 36 x 26 x 13 mm
Housing Colour Yellow
Sensor Principle Magnetic
Actuator Type Magnetic
Safety Category 4
Length 36mm
Width 26mm
Depth 13mm
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
48,51
(excl. BTW)
58,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 48,51
Related Products
The Ferrogard FRS 6, 9 and 10 are ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
The Ferrogard FRS 1, 2, 20 and 21 ...
Description:
The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.