Hygiemag MMR-H Magnetic Safety Switch, 316 Stainless Steel, 24 V dc

  • RS-stocknr. 826-4268
  • Fabrikantnummer 131016
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM HYGIEMAG MMR-H Non Contact Safety Switch

The HYGIEMAG MMR-H safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of hygiene. When used with dual channel safety relays, the MMR-H safety switch can be used to provide up to PLe/Category 4 to ISO13849-1 protection.

Features and Benefits

Magnetic high-power switching
Dual channel safety outputs
Stainless steel 316 housing
High temperature stability up to 105°C
Can be mounted on steel structures
High tolerance to guard misalignment
IP69K protection
Resistant to high temperature hosing and detergent wash down
Conformance to EN60947-5-3 PDF-S
Up to PLe ISO 13849-1
Compact & robust fitting for small guard applications
Suitable for food contact or slash zones - EHEDG guidelines
Mirror Polished Finish to Ra4
Suitable for CIP and SIP cleaning
2NC / 1 NO
10 mm wide sensing
Left or right cable exit options
Switching capacity 0.5A
22 mm fixing centres
Housing: 26 x 45 x 15 mm

Applications

The HYGIEMAG MMR-H non-contact safety switch is ideal for the food processing, pharmaceutical, packaging and chemical industries.

Note

The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.

Standards

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.

Approvals

CE, cULus, TUV.

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NC
Housing Material 316 Stainless Steel
Auxiliary Contacts NO
Connection Type M12
Switch Type Rectangular
Range HYGIEMAG
Terminal Type 8-Pin M12 Connector
Series MMR-H
Switching Distance 10 (Close) mm, 20 (Open) mm
IP Rating IP69K
Supply Current 200 (Auxiliary Channel) mA, 500 (Safety Channels) mA
Actuator Included Yes
Dimensions 39 x 26 x 15 (Actuator) mm, 45 x 26 x 15 (Switch) mm
Number of Approach Directions 2
Actuator Type Magnetic
Width 26 (Actuator) mm, 26 (Switch) mm
Sensor Principle Magnetic
Length 39 (Actuator) mm, 45 (Switch) mm
Safety Category 4
Depth 15 (Actuator) mm, 15 (Switch) mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
127,71
(excl. BTW)
154,53
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 127,71
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...
Description:
Eden - Adam and Eva from ABB is a non-contact safety sensor for use on interlocked gates, hatches etc. A coded signal is transmitted from the control device Vital or from the safety PLC Pluto via Adam to Eva which ...