RSS 36 RFID Safety Switch, Glass Fibre Reinforced Thermoplastic, Plastic, 20.4 26.4 V dc

  • RS-stocknr. 880-1750
  • Fabrikantnummer RSS 36-I2-D-ST
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Schmersal RSS36 Non Contact Safety Switch

The RSS36 electronic safety sensor with unique diagnosis meets the highest safety requirements, even when series-wired. It also features new coding functions for the uniform allocation of the actuator to the sensor, this is realised through the integrated RFID technology. The RSS36 has three different coding variants to enable an optimal conformation to the required protection against tampering. The universal mounting features and the optional latching function provides a smooth and rational integration in separating safety guards.

Thermoplastic enclosure
Misaligned actuation possible
Dimensions: 27 x 108.2 x 35 mm
High repeat accuracy of the switching points
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Increased protection against tampering by optional individual coding of safety sensor and actuator
Safety and diagnostic signals can be wired in series
LED status indication
Sensor with connecting cable or with integrated connector
Robust due to the used cleaning agent-resistant materials and protection class up to IP69K

Note

Actuators must be ordered separately.
Stock no. 880-1769 comes with a latching magnet.
Stock no. 880-1763 comes without a latching magnet.

Approvals

TUV, cULus, ECOLAB.

Supplied with

EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061.

Specificaties
Kenmerk Waarde
Supply Voltage 20.4 26.4 V dc
Housing Material Glass Fibre Reinforced Thermoplastic, Plastic
Connection Type M12
Switch Type Rectangular
Terminal Type 8-Pin M12 Connector
Series RSS 36
Switching Distance 10 (On) mm, 12 mm, 16 (Off) mm
IP Rating IP65, IP67, IP69K
Supply Current 600 mA
Actuator Included No
Number of Approach Directions 1
Actuator Type Unique Coded
Width 22mm
Length 106.3mm
Depth 25mm
Standards Met CE Listed, CULus Listed, ECOLAB, EN 62061, EN ISO 13849-1, IEC 60947-5-3, IEC 61508, TUV
Dimensions 106.3 x 22 x 25 mm
Sensor Principle RFID
Safety Category Bis 4, Category 3
Housing Colour Black, Blue
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
160,32
(excl. BTW)
193,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 160,32
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
Eden - Adam and Eva from ABB is ...
Description:
Eden - Adam and Eva from ABB is a non-contact safety sensor for use on interlocked gates, hatches etc. A coded signal is transmitted from the control device Vital or from the safety PLC Pluto via Adam to Eva which ...
The IN3000 direct inductive safety switch is used ...
Description:
The IN3000 direct inductive safety switch is used for position monitoring and works on a non-contact basis. The unique inductive sensor is activated by metal (e.g. ST37 steel) and therefore doesn't need a separate actuator. These safety switches can be ...
Functions include muting and override, concurrence monitoring, monitoring ...
Description:
Functions include muting and override, concurrence monitoring, monitoring total muting time, sensor gap monitoring, end of muting by ESPE. Applications: Opto-electronic protective devices and non-contact safety switches. 2 or 4 muting sensors1 reset/restart input and external device monitoringActivation and time ...