Eden OSSD Safety Non-Contact Switch, PBT, 24 V dc

  • RS-stocknr. 917-6406
  • Fabrikantnummer 2TLA020051R5600
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

ABB Eden OSSD Non Contact Safety Switches

The Eden OSSD from ABB is a coded non-contact safety switch. A PLe safety level can be achieved with only one switch per guard and with up to 30 switches connected in series. Installation time is reduced thanks to a compact design, flexible mounting and a large mounting tolerance.
The Eden OSSD increases productivity using an extensive indication and information output that enables troubleshooting and reduces downtime. It also has a large sensing distance for improved tolerance to vibrations and to minimise the risk of involuntary stops.
The safety switch has an IP69K protection class and a wide operating temperature range making it ideal for extreme environments.

Features and Benefits

Non-contact detection, 0-15 mm
OSSD outputs and inputs for serial connection
High level coded
Local reset function
Protection class IP69K

Applications

The Eden OSSD non-contact safety switch is suitable for use on doors and hatches as well as position control and sector detection.

Note

Stock nos. 917-6409 and 917-6402 have an information output and 917-6406 and 917-6415 monitor the reset function and manage the reset lamp.

Standards

IEC/EN 61508:2010 SIL3 PFHD 4.5 x 10-9, EN 62061:2005 SIL3, EN ISO 13849-1:2008 PL e/Cat. 4, EN 14119:2013 Type 4.

Approvals

CE, cULus, TUV.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material PBT
Connection Type M12
Switch Type Rectangular
Range Eden
Terminal Type 5-Pin M12 Connector
Series OSSD
Switching Distance 15 mm
IP Rating IP67, IP69K
Supply Current 30 mA
Actuator Included No
Housing Colour Grey, Yellow
Actuator Type Coded
Standards Met CE, CULus Listed, EN 60204-1:2006+A1:2009, EN 60664-1:2007, EN 60947-5-3:1999+A1:2005, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 61508:2010, EN 62061:2005/A1:2013, EN ISO 12100:2010, EN ISO 13849-1:2008/AC:2009, EN ISO 14119:2013, TUV
Dimensions 60 x 12 x 30 mm
Width 12mm
Length 60mm
Safety Category EN ISO 14119:2013
Depth 30mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
94,50
(excl. BTW)
114,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 94,50
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
Bistable, motor-driven systemClamping force 10.000 NRelease possible against ...
Description:
Bistable, motor-driven systemClamping force 10.000 NRelease possible against lateral forces up to 300 NPL e / cat. 4 / SIL 3 for interlocking and guard locking functionTwo-channel input signal of the guard locking functionOperation on P/P- and P/N-switching outputsHigh tolerance ...
The Sipha S2 is a non-contact switch in ...
Description:
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The IN3000 direct inductive safety switch is used ...
Description:
The IN3000 direct inductive safety switch is used for position monitoring and works on a non-contact basis. The unique inductive sensor is activated by metal (e.g. ST37 steel) and therefore doesn't need a separate actuator. These safety switches can be ...