PSENmag Magnetic Safety Non-Contact Switch, Plastic, 24 V dc

  • RS-stocknr. 918-6658
  • Fabrikantnummer 506334
  • Fabrikant Pilz
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

Pilz Non-contact Switch

The Pilz PSENmag series non-contact safety switch has an assured switching distance of 10mm. It has 2NO safety contact. It meets the highest safety requirements and offers a complete solution that is safe and economical.
Supplied with actuator
Caution:
EN60947-5-3 standard is only met if the entire system consisting of a safety switch (PSENmag), an actuator (PSENmag) and a safety-monitoring module (PNOZ X) is used.
Note:
Only stock nos. 744-8702 and 824-4918 have an LED.

Features and Benefits

Input The supply voltage is 24VDC
Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and actuator support every conceivable mounting configuration
Cost effective because of the series connection
Extra signal contact
Connection type is M8, 4-pin male
Housing material is Plastic
Operating temperature ranges between -25°C and 70°C

Applications

Heavy soiling

Certifications

IP65 rated
IP67 rated
EN954-1 (Cat 4)
EN60204-1
EN60947-5-3
ATEX approved
Electrosuisse certified
CE certified
UL approved
TÜV certified
BG certified
CCC certified

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Connection Type M8
Switch Type Square
Range PSENmag
Switching Distance 10 mm
IP Rating IP67
Actuator Included Yes
Sensor Principle Magnetic
Actuator Type Magnetic
Width 26.4mm
Length 37mm
Depth 18mm
Dimensions 37 x 26.4 x 18 mm
Safety Category 4
Housing Colour Yellow
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
38 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
50,99
(excl. BTW)
61,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 50,99
Related Products
The Omron F3S-TGR-N_C series non-contact switch has a ...
Description:
The Omron F3S-TGR-N_C series non-contact switch has a switching distance of 17mm and 24VDC supply voltage. This is a small sensor type with M12, 8-pin cable connection. This switch is designed to interlock hinged, sliding or removable guard doors. Both, ...
The Schmersal BNS260 series non-contact safety switch has ...
Description:
The Schmersal BNS260 series non-contact safety switch has a safe switch ON distance of 5mm and switch OFF distance of 15mm. This switch has 2NC contact. It has a black thermoplastic enclosure and can be concealed mounted as well.Note: Actuating ...
The Schmersal BNS33 safety sensor has a safe ...
Description:
The Schmersal BNS33 safety sensor has a safe switch ON distance of 5mm and switch OFF distance of 15mm. This switch has 1NO and 2NC contact. It has a black thermoplastic enclosure and can be concealed mounted as well.Note: The ...
The Allen Bradley Guardmaster MC2 series magnetic safety ...
Description:
The Allen Bradley Guardmaster MC2 series magnetic safety switch has a supply voltage rating of 24VDC. This switch comes with 10m cable. Its design incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...