Fluke 2AC Non Contact Voltage Detector With RS Calibration, 90V ac to 1000V ac

  • RS-stocknr. 810-5302
  • Fabrikantnummer FLK2AC/90-1000V
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: CN
Productomschrijving

Fluke 2AC VoltALERT Non-Contact Voltage Detector

VoltALERT non-contact voltage tester is the new addition to this series by Fluke. Pocket-sized and easy to use, the 2AC tests for defective grounds and energized circuits. A glowing red tip lights up when in close proximity of where voltage is present, such as a terminal strips, power cords or outlet wires.

Two new features on this instrument allow the user to be always at the ready, using special low power circuitry to sustain battery life the 2AC is always on the go. An innovative battery check button also allows users to ensure the battery is in good condition. Finally a clip design optimises pocket and tool bag storage.

Features and Benefits:

• 200 - 1000V ac Voltage detection
• Battery check button
• Category IV – 1000 V overvoltage rated product for best in class user protection
• Rugged and reliable
• -10°C to 50 °C operating temperature

Frequently asked questions:

What is a non-contact voltage tester used for?
Voltage testers or detectors are used to check the flow of current through a circuit. They can be used to check safety, or to ensure equipment is functioning correctly. They can also test for the current strength, whether the circuit is grounded correctly or to ensure no current is flowing at all so that work can be begin on the circuit.

How do non-contact voltage testers work?
Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage.

Standards

Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01, Pollution Degree 2

Specificaties
Kenmerk Waarde
Indicator Type Voltage
Calibrated RSCAL
Battery Type AAA
Power Source Battery
Safety Category CAT IV 1000 V
Weight 45.4g
Maximum Detection Voltage 1000V ac
Maximum Operating Temperature +50°C
Model Number p 2AC
Safety Category Voltage 1000V
Minimum Operating Temperature -10°C
Safety Category Level CAT IV
Minimum Detection Voltage 90V ac
236 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
79,00
(excl. BTW)
95,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 79,00
Related Products
RS Pro ICMA5 Slim line clamp meter used ...
Description:
RS Pro ICMA5 Slim line clamp meter used to check voltage, resistance, continuity and current. The integral non-contact ac voltage detector enables fast identification of the presence of mains voltages. The open jaw current clamp enables safe, non-intrusive measurement of ...
Fluke 325 tool belt kit is a high-value, ...
Description:
Fluke 325 tool belt kit is a high-value, low-cost kit comprising: Fluke 325 clampmeter ( 765-3660 ); Fluke T150 two-pole tester ( 750-8444 ); Fluke LVD2 voltage detector ( 336-328 ); tool belt; wire strippers. True RMS measurementsOptimised ergonomics.
For safe and reliable live indicationSuitable for non-contact ...
Description:
For safe and reliable live indicationSuitable for non-contact AC voltage tests, earthing/ground connection checks, proper connection checks, broken wire detectionHigh sensitivity tester offering an extensive non-contact voltage detection range of 70-1000V ACBright red LED illumination on detection of AC ...
Volt Stick is a pen style non-contact voltage ...
Description:
Volt Stick is a pen style non-contact voltage detector from our high quality RS PRO brand. Able to safely check the presence of an AC voltage within cables, wall sockets and fuses junction boxes, conveniently no current flow is needed ...