- RS-stocknr.:
- 388-7434
- Fabrikantnummer:
- 870-901
- Fabrikant:
- Wago
- RS-stocknr.:
- 388-7434
- Fabrikantnummer:
- 870-901
- Fabrikant:
- Wago
Wetgeving en compliance
Productomschrijving
Wago DIN Rail Terminal Block, 2 Conductors, 5mm Pitch - 870 Series - 870-901
Making connections in your setup is a piece of cake with this DIN rail terminal block from Wago. It clips onto your rail without the need for special tools, making it a cinch to install. The unit has a single-level structure with space for two conductors, so you can set up a dual wiring system. For flexibility, it accommodates wires ranging in size from 28 to 12AWG. The robust CAGE CLAMP® terminals lock down wires to ensure your electrical connections stay firmly in place.
Features & Benefits
Front entry wiring simplifies installation
Tough PA66 housing for resistance to impact and wear in harsh environments
Side and centre marking slots make it a breeze to label components for ease of identification
Low power loss per pole of 0.766W for energy efficiency
Tough PA66 housing for resistance to impact and wear in harsh environments
Side and centre marking slots make it a breeze to label components for ease of identification
Low power loss per pole of 0.766W for energy efficiency
Applications
Power stations
Marine engineering
Packaging facilities
Security systems
Marine engineering
Packaging facilities
Security systems
What's the current rating of this terminal block?
This terminal block has a current rating of 24A, so you can count on it to safely handle applications in high-power electrical systems.
Specificaties
Kenmerk | Waarde |
---|---|
Colour | Grey |
Number of Levels | Single |
Series | 870 |
American Wire Gauge | 28 → 12AWG |
Termination Method | Cage Clamp |
Cable CSA | 2.5mm² |
Fused | No |
Voltage Rating | 500 V |
Current Rating | 24A |
Pitch | 5mm |
Minimum Operating Temperature | -60°C |
Maximum Operating Temperature | +105°C |
Standards Met | CCA |