RS PRO, WS Series , 300 V Feed Through Terminal Block, Screw Down Termination

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

10-way Standard Feed Through Kit

50% space saving over conventional systems.
Top connection.
Each terminal supplied with two snap-on marker carriers and blank tags.
Rated at 300V, 10A
Cable sizes from 0.5 to 2.5mm2

Approvals

UL, CSA

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Series WS
Wire Size 0.5 → 2.5 mm²
Cable CSA 0.5 → 2.5mm²
Colour Grey
Current Rating 10A
Termination Method Screw Down
Voltage Rating 300 V
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
49 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,42
(excl. BTW)
15,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 12,42
Related Products
Glazed ceramic feed through terminals available in 2 ...
Description:
Glazed ceramic feed through terminals available in 2 sizes to fit the G-profile asymmetric rail to BS5825:1980, EN 50035. A maximum operating temperature of 250°C is achievable for continual use providing the correct end brackets are used. Terminal Pitch 8 ...
A 2 tier terminal, enabling higher density wiring ...
Description:
A 2 tier terminal, enabling higher density wiring on the rail. The WDK2.5 is a standard feed through while the WDK2.5V has a commoning bar connecting upper and lower tiers. All materials comply with RoHS requirements and have been tested ...
Series of large connections for DIN rails compatible ...
Description:
Series of large connections for DIN rails compatible with cables measuring between 6 mm2 and 70 mm2, with a nominal current of up to 192 A.All connections consist of a spring system designed to eliminate vibrations from the terminals.Compatible with ...
Fingerproof terminals (to VBG4 requirements)Flammability rating UL 94-V0Please ...
Description:
Fingerproof terminals (to VBG4 requirements)Flammability rating UL 94-V0Please note that none of the jumper bars shown in this range are suitable for use with this productCable sizes from 6 - 35mm2Mounting method DIN rail (top hat rail)/G-rail.