Phoenix Contact, 32444 Clipline Series , 250 V Standard Din Rail Terminal, Push In Termination

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PL
Productomschrijving

PTIO Sensor/Actuator Terminal Blocks

For the space- and time-saving wiring of three-conductor initiators and actuators with a terminal width of just 3.5 mm. Despite their small width, the terminals are easy to use thanks to push-in connection, testing facility on every terminal point, and large, easily legible label options.

Tailored for the wiring of sensors and actuators, all terminal blocks are the same shape and can therefore be combined with each other.

For the sensor / actuator wiring of modern machine and plant control systems
Small 3.5mm terminal width
Push-in connection
Test facility
Can be easily labelled

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

Specificaties
Kenmerk Waarde
Series PTIO 1.5/S/4
Wire Size 26 → 14 AWG
Cable CSA 1.5mm²
Colour Grey
Current Rating 13.5A
Number of Levels Quadruple
Termination Method Push In
Voltage Rating 250 V
40 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
95 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,242
(excl. BTW)
2,713
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 2,242
€ 11,21
*prijsindicatie
Related Products
Triple deck terminal block with tension clamp system ...
Description:
Triple deck terminal block with tension clamp system can be customised to your specific needs. Its compact design allows for space saving in the cabinet. • Spacious labelling area• Integrated test point• Cross-section functionality.
Compact design power terminal blocks for mounting exclusively ...
Description:
Compact design power terminal blocks for mounting exclusively on TS 35 rails of 2.3 mm depth. The terminals are built for a simple and secure connection under difficult conditions, using only an 8 mm male hexagonal spanner. A tightening point ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...
Screwless Z series DIN mounting terminals offer a ...
Description:
Screwless Z series DIN mounting terminals offer a top entry system that saves time and space. Quick and easy installation as the conductor is inserted using the clamping system. The top entry system means that the conductor entry and clamp ...