Weidmuller, P Series , 300 V Standard Din Rail Terminal, Push In Termination

  • RS-stocknr. 876-5402
  • Fabrikantnummer PRV 4 SW 35X7.5 RT - 1173830000
  • Fabrikant Weidmüller
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Marshalling terminal block

These marshalling terminal blocks from Weidmuller are ideal for space saving with their multi-tier terminals and push in connection technology. Several product lines are available including four, eight and sixteen channels. The four and eight channel terminal blocks are also available as potential distribution terminals.

Features and Benefits

• More than 1700 signals per metre can be distributed with the 16 channel terminal block • Easy to assign wires to their terminal points
• The push in connections make wiring quick and easy

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Series P
Wire Size 26 → 16 AWG
Colour Black
Current Rating 10A
Number of Levels Quadruple
Termination Method Push In
Voltage Rating 300 V
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
8,69
(excl. BTW)
10,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 8,69
Related Products
A miniature range of screw terminals designed for ...
Description:
A miniature range of screw terminals designed for mounting onto symmetric rail. The terminals are moulded in tough flame-resistant nylon 6.6. The captive terminal screws have hardened heads to prevent burring. • Standard terminals (grey or blue) and earth terminals ...
Triple deck terminal block with tension clamp system ...
Description:
Triple deck terminal block with tension clamp system can be customised to your specific needs. Its compact design allows for space saving in the cabinet. • Spacious labelling area• Integrated test point• Cross-section functionality.
Compact design power terminal blocks for mounting exclusively ...
Description:
Compact design power terminal blocks for mounting exclusively on TS 35 rails of 2.3 mm depth. The terminals are built for a simple and secure connection under difficult conditions, using only an 8 mm male hexagonal spanner. A tightening point ...
Feed-through terminal blocks with cage clamp® connection. • ...
Description:
Feed-through terminal blocks with cage clamp® connection. • DIN Rail type TS 35• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring.