6 Pole Panel Mount Non Fused Isolator Switch, NO, 32 A, IP65

  • RS-stocknr. 764-978
  • Fabrikantnummer T3-4-15682/S/SVB-SOND
  • Fabrikant Eaton
Wetgeving en compliance
Land van herkomst: GB

Switch Disconnectors with Auxiliary Contacts

For use on single-speed single direction motors
Sheet steel enclosures, ingress protection to IP65
Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)
Lockable in off position with up to three padlocks
Cover interlocked in the ON position


Switch power/capacity refers to AC23A use at 380-440V. Accessories shown in this module only suitable for use with P series switch disconnectors.


BS EN60947 and VDE 0113


  • Because of the heating effect in compact enclosures, the 100A versions should be downrated to 85A when in continuous operation.
    Auxiliary contact 333-546 should not be used with switches above 100A operating current.
Kenmerk Waarde
Number of Poles 6
Maximum Current 32 A
Mounting Type Panel Mount
Normal State Configuration NO
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Maximum Operating Temperature +40°C
Throw Configuration Single
Minimum Operating Temperature -25°C
Handle Colour Red
Terminal Type Screw
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-07-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 265,02
5 - 11
€ 256,93
12 +
€ 248,61
Related Products
All have a nominal voltage of 690V. The ...
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.
Adaptable with simple attachment of auxiliary contact, neutral ...
Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switchSuitable for main/emergency switching 690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3Supplied as complete kit in one pack.
RS Pro high quality range of boxed isolator ...
RS Pro high quality range of boxed isolator switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. The RS Pro range comes in 3, 4 and 6 pole versions and has a ...