3 Pole Panel Mount Non Fused Isolator Switch, NO, 25 A, 13 kW, IP65

  • RS-stocknr. 818-429
  • Fabrikantnummer P1-25/EA/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Lockable in the 0/OFF position, with up to three padlocks
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 25 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 640 A
Length 65mm
Width 65mm
Depth 59mm
Minimum Operating Temperature -25°C
Terminal Type Screw
Throw Configuration Single
Handle Colour Red
Maximum Operating Temperature +50°C
54 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
119 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
32,86
(excl. BTW)
39,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 32,86
5 - 11
€ 31,85
12 +
€ 30,82
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
Santon C-Type enclosed maintenance free switch disconnectors offer ...
Description:
Santon C-Type enclosed maintenance free switch disconnectors offer a high-power rating in a glass fibre filled Noryl enclosure. The enclosure offers high resistance to chemically aggressive substances, dirt, dust and salt. High-power rating 2 auxiliary contacts IP69 rated 10° sloping ...
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
These narrow format 194E series switch disconnectors are ...
Description:
These narrow format 194E series switch disconnectors are simple to install in limited panel space, they are easily modified and versatile to apply. They have finger safe design to IP20 in all live parts and the terminals, which provide self-centring ...