3 Pole Panel Mount Non Fused Isolator Switch, NO, 32 A, 15 kW, IP65

  • RS-stocknr. 818-435
  • Fabrikantnummer P1-32/EA/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Lockable in the 0/OFF position, with up to three padlocks
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Standards

IEC (EN60) 947, IEC (EN60) 204

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 32 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 15 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 640 A
Length 65mm
Width 65mm
Depth 59mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
Throw Configuration Single
Terminal Type Screw
Handle Colour Red
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
87 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
60,12
(excl. BTW)
72,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 60,12
5 - 11
€ 58,30
12 +
€ 56,40
Related Products
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust ideal for hard wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switch from Eaton is suitable for use in applications where there ...
The Eaton 3+N pole flush mount non-fused switch ...
Description:
The Eaton 3+N pole flush mount non-fused switch disconnector is lockable at 0 (OFF) position. It has a switching rating of 320A. Its service temperature ranges between 40°C and 50°C. • 1 and 3 electrical phase• Accepts padlocks• Maximum current ...
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.