3 + N Pole Panel Mount Switch Disconnector, 3NO, 63 A, 37 kW, IP65

  • RS-stocknr. 103-8406
  • Fabrikantnummer P3-63/EA/SVB/N
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Non-Fused Isolator Switch - P3-63/EA/SVB/N

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• 3 pole + N
• Main functions are as a main switch, maintenance switch and repair switch
• Lockable in the 0/OFF position, with up to three padlocks
• Flush mounting
• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Features an ambient operating temperature of -25 to +50 °C
• Has a mechanical shock resistance of 15g
• M5 screw terminal
• Number of switches -1

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Specificaties
Kenmerk Waarde
Number of Poles 3 + N
Maximum Current 63 A
Series P3-63
Mounting Type Flush Mount
Normal State Configuration 3NO
Power Rating 37 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Electrical Phase 1, 3
Switch Rating 640 A
Length 87mm
Width 101mm
Depth 114mm
Terminal Type Screw
Throw Configuration Single
Handle Colour Red
Maximum Operating Temperature +50°C
Minimum Operating Temperature -25°C
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
40 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
140,29
(excl. BTW)
169,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 140,29
Related Products
An range of rear mounting switch disconnectors from ...
Description:
An range of rear mounting switch disconnectors from Eaton Moeller. On these switches the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and ...
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where ...
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...
Eaton's isolator switch can sometimes be referred to ...
Description:
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a ...