6 Pole Panel Mount Switch Disconnector, 6NO, 20 A, 6.5 kW, IP65

  • RS-stocknr. 103-8424
  • Fabrikantnummer 029382 | T0-3-8342/EA/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Emergency Mains Switch

This Professional range of Eaton flush or surface mounted changeover, Mains, maintenance and Repair switches provides a solution for heavy-duty and industrial applications. These type of switches can sometimes be referred to as a emergency mains switch or emergency button, this is because of the nature of what it has been designed to do - stop, in the case of an emergency through the pull or twist of a button.

All the changeover switches are IP65 rated meaning they offer complete protection against contact (dust-tight) and water jets. They all have a red rotary handle and all the switches are lockable in the OFF position.

Features & Benefits

IP65 Rated
Flush or Surface Mouniting
Red rotary handle
Lockable in the OFF position

What is the difference between a push-button switch for an emergency stop and a general-purpose push button switch?

A general-purpose push button switch is used for controls. For example to start machine operation or simply to switch between different modes. An emergency stop switch or pushbutton, however, is mainly used as a safety measure to stop hazardous events.

Eaton

Specificaties
Kenmerk Waarde
Number of Poles 6
Maximum Current 20 A
Series T0-3
Mounting Type Panel Mount
Normal State Configuration 6NO
Power Rating 6.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Electrical Phase 1, 3
Switch Rating 110 A
Length 48mm
Width 100mm
Depth 65mm
Minimum Operating Temperature -25°C
Terminal Type Screw
Handle Colour Red
Throw Configuration Single
Maximum Operating Temperature +50°C
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 62,01
54,21
(excl. BTW)
65,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 54,21
Related Products
The Eaton 3+N pole flush mount non-fused switch ...
Description:
The Eaton 3+N pole flush mount non-fused switch disconnector is lockable at 0 (OFF) position. It has a switching rating of 320A. Its service temperature ranges between 40°C and 50°C. • 1 and 3 electrical phase• Accepts padlocks• Maximum current ...
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.
These narrow format 194E series switch disconnectors are ...
Description:
These narrow format 194E series switch disconnectors are simple to install in limited panel space, they are easily modified and versatile to apply. They have finger safe design to IP20 in all live parts and the terminals, which provide self-centring ...