The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.
Preforms local isolation, manual override & safety switch functions
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Kenmerk | Waarde |
---|---|
Number of Poles | 3 + N |
Maximum Current | 25 A |
Mounting Type | Panel Mount |
Series | P1-25 |
Normal State Configuration | 3NO |
Power Rating | 13 kW |
IP Rating | IP65 |
Accepts Padlocks | Yes |
Voltage Rating | 690 V |
Electrical Phase | 1, 3 |
Switch Rating | 190 A |
Length | 48mm |
Width | 99mm |
Depth | 65mm |
Minimum Operating Temperature | -25°C |
Terminal Type | Screw |
Maximum Operating Temperature | +50°C |
Throw Configuration | Single |
Handle Colour | Red |