3 Pole Panel Mount Switch Disconnector, 3NO, 25 A, 13 kW, IP65

  • RS-stocknr. 103-8445
  • Fabrikantnummer P1-25/EA/SVB/HI11
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators

The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

• Preforms local isolation, manual override & safety switch functions

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 25 A
Series P1-25
Mounting Type Panel Mount
Normal State Configuration 3NO
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Auxiliary Contacts Available Yes
Electrical Phase 1, 3
Switch Rating 190 A
Length 48mm
Width 99mm
Depth 65mm
Throw Configuration Single
Minimum Operating Temperature -25°C
Handle Colour Red
Maximum Operating Temperature +50°C
Terminal Type Screw
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
63,16
(excl. BTW)
76,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 63,16
Related Products
TeSys GS fusible disconnect switches ensure load closing ...
Description:
TeSys GS fusible disconnect switches ensure load closing or cut-off, safety isolation and protection against surges for all low voltage electrical circuits.Located at the top of electrical panels, they are specially designed to protect and interrupt main circuits (including the ...
Osiswitch limit switches available with fully interchangeable metal ...
Description:
Osiswitch limit switches available with fully interchangeable metal or plastic bodies and fully interchangeable operating heads. Fitted with 1 NO and 1 NC contacts. Ingress protection is to IP66/IP67 and the switches meet the requirements of EN50047. A variety of ...
The OsiSwitch series contains a selection of bodies ...
Description:
The OsiSwitch series contains a selection of bodies and levers that are compatible with products from the OsiSense XC limit switch range. Limit Switch BodySilver plated contacts with snap action2 PolesDurable and strong housingShort circuit protection.
A range of adaptable cam switches which can ...
Description:
A range of adaptable cam switches which can be used for panel building,HVAC and motor control applications. Operating currents to EN 60 947-3Voltage rating up to 690Vac (3 phase)Breaking capacity AC22, AC23Fingerproof terminals to IP20Switch protection rating IP65, but note ...