3 Pole Panel Mount Switch Disconnector, 3NO, 25 A, 13 kW, IP65

  • RS-stocknr. 103-8450
  • Fabrikantnummer P1-25/V/SVB/HI11
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Rear Mounting Switch Disconnectors

An range of rear mounting switch disconnectors from Eaton Moeller. On these switches the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and manual overrode switches.

Rear mounting
Black or Red rotary handle and locking ring
Lockable in the 0 (Off) position
IP65 ingress protection rating

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 25 A
Mounting Type Panel Mount
Series P1-25
Normal State Configuration 3NO
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Auxiliary Contacts Available Yes
Electrical Phase 1, 3
Switch Rating 190 A
Length 65mm
Width 147mm
Depth 82mm
Throw Configuration Single
Maximum Operating Temperature +50°C
Minimum Operating Temperature -25°C
Terminal Type Screw
Handle Colour Red
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
67,88
(excl. BTW)
82,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 67,88
Related Products
The switch fuses from the ABB OS series ...
Description:
The switch fuses from the ABB OS series are available in 3 or 4 pole. These fused switches are easy to use and snap to install, the adjustable mounting feet allow both top and side mounting of the switch fuse. ...
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...
Eaton's isolator switch can sometimes be referred to ...
Description:
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a ...
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where ...