3 Pole Surface Mount Non-Fused Switch Disconnector, NO/NC, 25 A, 13 kW, IP65

  • RS-stocknr. 176-9731
  • Fabrikantnummer P1-25/I2/SVB-SW/HI11
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Main switch, 3 pole + 1 N/O + 1 N/C, 25 A, STOP function, Lockable in the 0 (Off) position, surface mounting

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 25 A
Mounting Type Surface Mount
Normal State Configuration NO/NC
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Auxiliary Contacts Available Yes
Switch Rating 640 A
Length 100mm
Width 115mm
Depth 180mm
Maximum Operating Temperature +40 (Enclosed)°C
Terminal Type Screw
Minimum Operating Temperature -25°C
Handle Colour Black
6 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
53,80
(excl. BTW)
65,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 53,80
Related Products
Incorporates a 2-contact switch disconnecter mechanism - both ...
Description:
Incorporates a 2-contact switch disconnecter mechanism - both contacts are open circuit when fuse removedTouch proof terminals (D01 only)Nominal frequency 50-60HzProtection IP20Snap-on fixing to mounting railBody in shockproof insulating material, light grey (RAL 7035).
Fuse melt changeover micro-switch, activated by the fuse ...
Description:
Fuse melt changeover micro-switch, activated by the fuse striker with manual reset (MS 3 V 1.5) or automatic reset (MS 4 L 2.5).Screws straight onto the 690 V square Protistor® fuse body.UL approved.
Fused switch-disconnectors with 14 x 51 mm and ...
Description:
Fused switch-disconnectors with 14 x 51 mm and 22 x 58 mm cartridges, allowing disconnection of power circuits.All of these switch-disconnectors feature one or two auxiliary contacts to be inserted into the control circuit.35 mm DIN rail mounted.Accessories available for ...
Three pole fuse disconnector for motor protection.Connection by ...
Description:
Three pole fuse disconnector for motor protection.Connection by spring terminals (LS1 D323) or screws (LS1 D32).Fuse cartridge format: 10 x 38mm.Additional pole also available.