6 Pole DIN Rail Non Fused Isolator Switch, 80 A, 30 kW, IP65

  • RS-stocknr. 222-6024
  • Fabrikantnummer KG80T206GBA010VE
  • Fabrikant Kraus & Naimer
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

6-Pole Extended Shaft Switch Disconnectors IP65 Rated

80A, 100A and 125A switches have a terminal cover included
High visibility handle padlockable (x4) in "OFF" position
Interlocked in "ON" position to prevent panel door being opened while switch is on
Additional side mounted auxiliary contacts can be added to all, except the 125A version (switch must be in the "ON" position) - see Accessories table
Mounting via DIN rail or screw to back of panel
Adjustable shaft (40 to 100A)
Fixed length shaft (25 to 32A)

Note

Motor rating refers to AC23A type and Motor load rating refers to AC3.

Standards

BS EN 60947-3, EN60947-3, IEC 60947-3, VDE 0660, EN 60204-1

Approvals

UL, CSA

//media.rs-online.com/t_line/L222598-06.gif
//media.rs-online.com/t_line/LD222598-03.gif
//media.rs-online.com/t_line/LD222598-04.gif
//media.rs-online.com/t_line/LD222598-05.gif
//media.rs-online.com/t_line/LD222598-06.gif

Kraus & Naimer

All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply.

Specificaties
Kenmerk Waarde
Number of Poles 6
Maximum Current 80 A
Mounting Type DIN Rail
Power Rating 30 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Length 140mm
Width 80mm
Depth 172.2mm
Terminal Type Wire Lead
Maximum Operating Temperature +55°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
130,76
(excl. BTW)
158,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 130,76
5 - 11
€ 126,75
12 +
€ 122,66
Related Products
The ISDC panel isolators provide a compact range ...
Description:
The ISDC panel isolators provide a compact range of switch disconnectors with the capacity to add auxiliary and neutral block options to the load break switch block. This series of switches are suitable for use as load break isolators within ...