3 Pole Panel Mount Non Fused Isolator Switch, 32 A, 11 kW, IP20, IP65

Wetgeving en compliance
Land van herkomst: CZ

Schneider Electric Isolator Switch - VCCF1

Forming part of Schneider Electrics TeSys Vario Switch range is this isolator switch which is sometimes referred to as a switch disconnector. Comprised of a non-corrosive and resistant material that is suitable for harsh environments, this three-pole version is perfectly suited for manual motor control applications. Super easy to connect and wire as well as come undrilled which enables variable cable entry positions.

Features & Benefits

  • Rotary type switch disconnector

  • High-performance level

  • The switch function of this device is an emergency stop

  • 3 pole

  • has an AC network type

  • Extended rotary handle mounting style

  • Aesthetically pleasing red handle and yellow front plate

  • The rotary handle is padlockable up to 3 times

  • Has a rated operational voltage of 690 V AC 50/60 Hz

  • Mechanically durable up to 100000 cycles and has Electrical durability of 30000 cycles on DC-1...5, 100000 cycles on AC-21

  • Supplied with handle assembly, shaft extension door interlock plate and terminal shroud

  • Product standards - IEC 60947-3 and product certifications are CCC, CSA, GL and UL

How does an isolator switch work?

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Schneider Electric Vario Range

Kenmerk Waarde
Number of Poles 3
Maximum Current 32 A
Range TeSys
Series VARIO
Mounting Type Panel Mount
Power Rating 11 kW
IP Rating IP20, IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 8 kV
Length 60mm
Maximum Operating Temperature +50°C
Terminal Type Screw
Handle Colour Red
Minimum Operating Temperature -20°C
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
131 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 47,60
5 - 9
€ 46,15
10 +
€ 44,66
Related Products
TeSys GS fusible disconnect switches ensure load closing ...
TeSys GS fusible disconnect switches ensure load closing or cut-off, safety isolation and protection against surges for all low voltage electrical circuits.Located at the top of electrical panels, they are specially designed to protect and interrupt main circuits (including the ...
Designed to provide protection against the risk of ...
Designed to provide protection against the risk of electrocution and fire hazards.Passive circuitry - power is restored immediately after a power failure.Active circuitry - power is only restored after device has been manually reset, thus protecting against equipment suddenly re-energising. ...
The compact, oil & watertight indicator is ideally ...
The compact, oil & watertight indicator is ideally suited for real world industrial applications. Benefits of the unique PCB assembly include decreased production costs, elimination of wiring errors, and reduction of bad solder joints. Clutter-free back-of-panel PCB wiringEasy printed circuit ...
Designed to trigger an I.C., these switches detect ...
Designed to trigger an I.C., these switches detect tilt or tip-over movement Vertical and 90° Pin versions in polyamide UL94V-0 housingBoth types have gold plated ball and gold plated terminals for improved life and stabilitySuitable for alarm and non-hazardous applicationsDifferential ...