2 Pole Panel Mount Non Fused Isolator Switch, NO, 20 A, 6.5 kW, IP65

  • RS-stocknr. 257-9384
  • Fabrikantnummer T0-1-102/EA/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Lockable in the 0/OFF position, with up to three padlocks
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Standards

IEC (EN60) 947, IEC (EN60) 204

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Number of Poles 2
Maximum Current 20 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 6.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 1
Switch Rating 320 A
Length 90mm
Width 75mm
Depth 41mm
Handle Colour Red
Maximum Operating Temperature +50°C
Terminal Type Screw
Minimum Operating Temperature -25°C
Throw Configuration Single
139 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
133 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
25,33
(excl. BTW)
30,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 25,33
5 - 11
€ 24,56
12 +
€ 23,76
Related Products
For use on single-speed single direction motorsSheet steel ...
Description:
For use on single-speed single direction motorsSheet steel enclosures, ingress protection to IP65Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)Lockable in off position with up to three padlocksCover interlocked in ...
Professional range of Eaton flush or surface mounted ...
Description:
Professional range of Eaton flush or surface mounted changeover switches. All the changeover switches are IP65 rated and have red rotary handle. All the switches are lockable in the OFF position. IP65 RatedFlush or Surface MounitingRed rotary handleLockable in the ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.