2 Pole Enclosed Non Fused Isolator Switch, NO, 20 A, 6.5 kW, IP65

  • RS-stocknr. 330-7988
  • Fabrikantnummer T0-1-102/I1/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

Specificaties
Kenmerk Waarde
Number of Poles 2
Maximum Current 20 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 6.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 1
Switch Rating 320 A
Length 137mm
Width 80mm
Depth 75mm
Maximum Operating Temperature +50°C
Terminal Type Screw
Handle Colour Red
Minimum Operating Temperature -25°C
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
114 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
28,20
(excl. BTW)
34,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 28,20
5 - 11
€ 27,34
12 +
€ 26,47
Related Products
For use on single-speed single direction motorsSheet steel ...
Description:
For use on single-speed single direction motorsSheet steel enclosures, ingress protection to IP65Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)Lockable in off position with up to three padlocksCover interlocked in ...
Professional range of Eaton flush or surface mounted ...
Description:
Professional range of Eaton flush or surface mounted changeover switches. All the changeover switches are IP65 rated and have red rotary handle. All the switches are lockable in the OFF position. IP65 RatedFlush or Surface MounitingRed rotary handleLockable in the ...
Professional range of Eaton flush or surface mounted ...
Description:
Professional range of Eaton flush or surface mounted changeover switches. All the changeover switches are IP65 rated and have red rotary handle. All the switches are lockable in the OFF position. IP65 RatedFlush or Surface MounitingRed rotary handleLockable in the ...
Padlockable in OFF position, up to 3 padlocks ...
Description:
Padlockable in OFF position, up to 3 padlocks and non-locking versionsIngress protection to IP652 and 3 pole versions have built in neutral and earth connections3 pole switches ('P' type only) accept add-on switched neutral and auxiliary contacts (except 20A switches) ...