3 Pole Enclosed Non Fused Isolator Switch, NO, 25 A, 13 kW, IP65

  • RS-stocknr. 393-9743
  • Fabrikantnummer P1-25/I2H/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

The perfect solution for installing as a safety measure Used as an emergency switching off/emergency stop device The basic functions: used as a main switch, maintenance switch or manual override switch Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions Built-in earth commoning block Lockable in the 0/OFF position, with up to three padlocks Totally insulated Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 25 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 640 A
Length 160mm
Width 100mm
Depth 80mm
Terminal Type Screw
Handle Colour Red
Throw Configuration Single
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
66 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
36,06
(excl. BTW)
43,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 36,06
5 - 11
€ 34,96
12 +
€ 33,83
Related Products
Santon C-Type enclosed maintenance free switch disconnectors offer ...
Description:
Santon C-Type enclosed maintenance free switch disconnectors offer a high-power rating in a glass fibre filled Noryl enclosure. The enclosure offers high resistance to chemically aggressive substances, dirt, dust and salt. High-power rating 2 auxiliary contacts IP69 rated 10° sloping ...
The 194E switch disconnector range forms part of ...
Description:
The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat ...
These narrow format 194E series switch disconnectors are ...
Description:
These narrow format 194E series switch disconnectors are simple to install in limited panel space, they are easily modified and versatile to apply. They have finger safe design to IP20 in all live parts and the terminals, which provide self-centring ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. 3-pin safety switchSealed construction, IP65Cable feed through from above and belowWith auxiliary contact.