Eaton 3 Pole Enclosed Non Fused Isolator Switch - 63 A Maximum Current, 37 kW Power Rating, IP65

  • RS-stocknr. 393-9765
  • Fabrikantnummer 207343 & P3-63/I4/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 63 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 37 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 1260 A
Length 160mm
Width 240mm
Depth 95mm
Maximum Operating Temperature +50°C
Throw Configuration Single
Terminal Type Screw
Handle Colour Red
Minimum Operating Temperature -25°C
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
127,57
(excl. BTW)
154,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 127,57
5 - 11
€ 123,68
12 +
€ 119,67
Related Products
The Eaton T0, series 3 pole + N ...
Description:
The Eaton T0, series 3 pole + N contact, emergency main switch has current ratings of 20 A. It has 2 contact units provides emergency switching off function. It has a steel enclosure with a yellow locking ring and red ...
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
This Professional range of Eaton flush or surface ...
Description:
This Professional range of Eaton flush or surface mounted changeover, Mains, maintenance and Repair switches provides a solution for heavy-duty and industrial applications. These type of switches can sometimes be referred to as a emergency mains switch or emergency button, ...
Thermoplastic surface mounting enclosure with M25 cable entriesMetric ...
Description:
Thermoplastic surface mounting enclosure with M25 cable entriesMetric cable glands can be fittedIngress protection to IP65 (IP54 with cable fitted)Two or three-position rotary switches: Changeover without OFF, Changeover with OFF, ON/OFFM20 on 20A switches/M25 on 25A and 32A/M20, M25 or ...