- RS-stocknr.:
- 393-9800
- Fabrikantnummer:
- 207281 T5-4-15682/I5/SVB
- Fabrikant:
- Eaton
10 op voorraad - levertijd is 4 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 448,14
(excl. BTW)
€ 542,25
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 448,14 |
5 - 11 | € 434,44 |
12 + | € 420,38 |
- RS-stocknr.:
- 393-9800
- Fabrikantnummer:
- 207281 T5-4-15682/I5/SVB
- Fabrikant:
- Eaton
Wetgeving en compliance
Productomschrijving
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Eaton 6-Pole Non-Fused Switch Disconnector - T5-4 Series - T5-4-15682/I5/SVB
This isolator switch from Eaton is designed to safely isolate a circuit while it's being used or maintained. Also known as a switch disconnector, it breaks current flow to the circuit through the rotation of a lockable rotary handle. It can also serve as an emergency stop function as it's designed to be lockable in the off position. As it's fully insulated, it protects you and your equipment against electrical short circuits. You'll commonly find this switch used for the maintenance and repair of circuit breakers and transformers.
• Impact and corrosion-resistant thermoplastic enclosure for use in harsh environments
• Broad operating temperature range of -25°C to +50°C for use in a range of demanding applications
• IP (ingress protection) 65 rating for protection against dust and low-pressure water jets
• Surface-mounted for ease of access
• Broad operating temperature range of -25°C to +50°C for use in a range of demanding applications
• IP (ingress protection) 65 rating for protection against dust and low-pressure water jets
• Surface-mounted for ease of access
What's the difference between a fused switch disconnector and a non-fused switch disconnector?
A non-fused switch disconnector like this one doesn't use a fuse to break a circuit. It uses a rotary to disconnect or isolate a circuit, which eliminates the need to change the fuse in the event of breakage.
Note
Eaton formerly known as Moeller
Specificaties
Kenmerk | Waarde |
---|---|
Number of Poles | 6P |
Maximum Current | 100A |
Mounting Type | Surface Mount |
IP Rating | IP65 |
Power Rating | 30kW |
Voltage Rating | 415V ac |
Accepts Padlocks | Yes |
Handle Colour | Red |
Normal State Configuration | NO |
Auxiliary Contacts Available | Yes |
Series | Eaton Moeller |
Switch Rating | 1850A |
Length | 280mm |
Width | 200mm |
Depth | 125mm |
Terminal Type | Screw |
Maximum Operating Temperature | +40°C |
Throw Configuration | Single |
Minimum Operating Temperature | -25°C |
- RS-stocknr.:
- 393-9800
- Fabrikantnummer:
- 207281 T5-4-15682/I5/SVB
- Fabrikant:
- Eaton