3 Pole Panel Mount Non Fused Isolator Switch, 16 A, 7.5 hp, 7.5 kW, IP66

  • RS-stocknr. 443-0708
  • Fabrikantnummer 194E-E16-1753-4N
  • Fabrikant Allen Bradley
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Switch Disconnectors

These narrow format 194E series switch disconnectors are simple to install in limited panel space, they are easily modified and versatile to apply. They have finger safe design to IP20 in all live parts and the terminals, which provide self-centring cable guides. Rated powers of 5.5kW in AC3 and 7.5kW in AC23A categories (400V) can be switched on a panel surface of only 36mm wide. Rated current is 16A at 690Vac (AC1 and AC21A). They are CE marked, cUL approved, and fulfil the requirements of most international standards of operational safety and reliability. Snap-on modular accessories are available.

Three-pole versions are complete with handle
Six pole versions are switch bodies only, for operating handle order stock no. 261-8259

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 16 A
Mounting Type Panel Mount
Power Rating 7.5 hp, 7.5 kW
IP Rating IP66
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 20 kA
Length 63mm
Width 36mm
Depth 51mm
Minimum Operating Temperature -25°C
Terminal Type Wire Lead
Handle Colour Red/Yellow
Maximum Operating Temperature +60°C
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
22 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,40
(excl. BTW)
37,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 31,40
Related Products
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust ideal for hard wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switch from Eaton is suitable for use in applications where there ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Fingerproof terminalsPadlockable in "OFF" position22.5mm single hole mounting.Faceplate engraved 0-1.
Adaptable with simple attachment of auxiliary contact, neutral ...
Description:
Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switchSuitable for main/emergency switching 690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3Supplied as complete kit in one pack.
Main and emergency stop switchHandle in Black or ...
Description:
Main and emergency stop switchHandle in Black or Red/Yellow(emergency stop)Front plate 48 x 48 mmFour hole or central hole fixingAccepts 3 padlocksFront panel seal IP65.