1 Pole Non Fused Isolator Switch, 5 A

  • RS-stocknr. 539-3701
  • Fabrikantnummer 4404.0007
  • Fabrikant Schurter
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

T9 series thermal circuit breakers

T9 single-pole, compact thermal circuit breakers.
Trigger via a bimetallic element.
Connection via Faston terminals.
Reset button on the front panel.
Snap-fitting installation.

Approvals

UL, CSA, IEC 60394

//media.rs-online.com/t_line/LF539369-01.jpg

Thermal Magnetic Convertible

All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms).

Specificaties
Kenmerk Waarde
Number of Poles 1
Maximum Current 5 A
Voltage Rating 32 V dc, 240 V ac
Length 19mm
Width 19mm
Depth 47.5mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +60°C
240 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,10
(excl. BTW)
2,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 2,10
25 - 49
€ 1,97
50 - 99
€ 1,87
100 - 249
€ 1,77
250 +
€ 1,68
Related Products
Padlockable in OFF position, up to 3 padlocks ...
Description:
Padlockable in OFF position, up to 3 padlocks and non-locking versionsIngress protection to IP652 and 3 pole versions have built in neutral and earth connections3 pole switches ('P' type only) accept add-on switched neutral and auxiliary contacts (except 20A switches) ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.
iSW switch-disconnectors for control of opening and closing ...
Description:
iSW switch-disconnectors for control of opening and closing of circuits under load. Rating: 20 to 125 A VisiSafe for safe operation and maintenance work on circuit protectionAvailable options: state indication; sealable terminal shield, rotary handle, padlocking device.
The Sirco M range are manually operated load ...
Description:
The Sirco M range are manually operated load break switches which make and break under load conditions and provide safety isolation for any low voltage circuit, particularly for machine control circuits. The Sirco M range are 3 pole switch disconnectors ...