8 Pole DIN Rail Non Fused Isolator Switch, 16 A, 7.5 kW, IP20

  • RS-stocknr. 707-6221
  • Fabrikantnummer OT16F8
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: SE
Productomschrijving

OT Non Fusible Switch Disconnectors

ABB OT series switch disconnectors are largely used as the main switch in low voltage switchgears or distribution of power, starting and stopping motors and isolating loads during maintenance. A wide range from 16 A to 160 A, available as either base plate or door mounted.

Note

Stock numbers 125-0861 and 125-0862 supplied with handles and shafts.

Specificaties
Kenmerk Waarde
Number of Poles 8
Maximum Current 16 A
Mounting Type DIN Rail
Power Rating 7.5 kW
IP Rating IP20
Voltage Rating 400 V ac
Switch Rating 8 kV
Length 96mm
Width 68mm
Depth 68mm
Terminal Type Clamp
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
84,50
(excl. BTW)
102,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 84,50
10 - 14
€ 80,28
15 +
€ 76,05
Related Products
Totally insulated enclosures to IP65Black thumb grip and ...
Description:
Totally insulated enclosures to IP65Black thumb grip and grey front plate, emergency stop versions have a red thumb grip and yellow front plateSurface mounting.
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Single hole mounting Handle padlockable (x4) in "OFF" positionAdjustable metal operating shaft, length 120mmDoor interlocked to prevent opening of panel ...
Main and emergency stop switchHandle in Black or ...
Description:
Main and emergency stop switchHandle in Black or Red/Yellow(emergency stop)Front plate 48 x 48 mmFour hole or central hole fixingAccepts 3 padlocksFront panel seal IP65.
An range of rear mounting switch disconnectors from ...
Description:
An range of rear mounting switch disconnectors from Eaton Moeller. On these switches the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and ...