2 Pole Panel Mount Non Fused Isolator Switch, 2NO+2NC, 160 A

  • RS-stocknr. 841-2650
  • Fabrikantnummer 1SCA125840R1001
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Switch Disconnectors for Photovoltaic Systems

The ABB OTDC series switch-disconnectors are expertly designed for PV applications and are most commonly used to isolate single strings or arrays of solar panels and battery banks. The switch disconnectors can also act as the main switch for the entire photovoltaic application.

Compact size
Unique safety features
Simple and quick installation
Safe and reliable

OTDC 16…32 Amperes

OTDC from 16…32 Amperes have numerous DC ratings within the same footprint space and the rated operational voltage can be scaled up to 1000 V to suit your application. Tunnel terminals capture fine stranded wires and they are wide enough to allow wires up to 16 mm and short circuit bars are preinstalled as standard.

OTDC 100...250

OTDC switches from 100…250 Amperes are the only 2-pole solution in the market with an operational voltage of 1000 VDC. This is possible thanks to carefully optimized arc plates and dual magnetic breaking.The switches are symmetrical in design and connections are independent of polarity, meaning they can work in both ways.

The OT range of switch disconnectors are suitable for use in a variety of applications including motor control centres, switchboards and as main switches in machines.

Specificaties
Kenmerk Waarde
Number of Poles 2
Maximum Current 160 A
Mounting Type Panel Mount
Normal State Configuration 2NO+2NC
Voltage Rating 1 kV dc
Length 113mm
Width 176mm
Depth 73.5mm
Terminal Type Lug
Maximum Operating Temperature +50°C
Throw Configuration Single
Minimum Operating Temperature -20°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
463,00
(excl. BTW)
560,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 463,00
5 - 11
€ 448,88
12 +
€ 434,38
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
For use on single-speed single direction motorsSheet steel ...
Description:
For use on single-speed single direction motorsSheet steel enclosures, ingress protection to IP65Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)Lockable in off position with up to three padlocksCover interlocked in ...
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.