RS PRO Non-Fused Terminal Block, 12 Way/Pole, Screw Down Terminals, 2.5 mm² Through Hole, Nylon, 400 V

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Nylon 6.6 Terminal Block With Wire Protection Leaf

From RS PRO, this non-fused terminal block presents a reliable and cost-effective solution to wire-to-wire connections. The terminal block is direct-mount and so does not require the use of a DIN Rail to mount. Instead, it features two mounting screws that allow mounting to any surface. This nylon terminal block can easily be cut to a required length, allowing for a highly customizable connector solution.

This RS PRO terminal block also features metallic wire protection strips that isolate the conductor from the terminal screw, for increased safety and reliability.

Features and Benefits

• M3 x 5 mm screw terminals
• Wire protection leaf
• Nylon 6.6 housing with nickel plated brass clamps

Applications

Modular terminal connectors have a wide range of applications and are a common component in electrical installations of all kinds, both domestic and industrial. The simplicity of their screw-down termination means they are particularly well suited to semi-permanent installations.

Whether for device connection to printed circuit boards or for wire-to-wire extensions, terminal blocks provide a straight forward and dependable connection solution. These non-fused terminal blocks are often used in;

• Connecting lighting to switches
• Connecting wiring to a ground
• HVAC Systems
• Power Supplies

FAQs

Q: Are these terminal blocks suitable for all environments?
A: Though terminal blocks are highly versatile, they are not the most secure of connectors, and may not be suitable for high vibration environments or applications where impact shock is a possibility.

Why RS PRO?

RS PRO strives to give you reliable parts at competitive prices. With in-house experts testing all of our RS PRO branded products, we're confident we'll satisfy your demand for quality and dependability.

RS PRO has an extensive range of electrical connector components. Whether you're operating in an industrial environment or domestic maintenance, RS PRO is with you every step of the way.

Specificaties
Kenmerk Waarde
Number of Ways 12
Mounting Type Through Hole
Pitch 10mm
Current Rating 24A
Termination Method Screw Down
Wire Size 2.5 mm²
Material Nylon
Voltage Rating 400 V
Maximum Operating Temperature +125°C
Contact Material Brass
Contact Plating Nickel
1760 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7025 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,23
(excl. BTW)
2,70
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 245
€ 2,23
€ 11,15
250 - 495
€ 2,008
€ 10,04
500 +
€ 1,782
€ 8,91
*prijsindicatie
Related Products
Double deck terminals where both levels are electrically ...
Description:
Double deck terminals where both levels are electrically connected to the DIN rail via an earthing foot. Dimensionally the same as the standard Double Deck terminal, the same end cover and jumper bar can be used. Cable CSA 2.5mm².
This RS Pro fused panel mount terminal block ...
Description:
This RS Pro fused panel mount terminal block features an integrated in-line fuse holder. The white housing is made from nylon with tinned brass inserts for a screwed termination. A pull-up latch enables an easy replacement of a fuse. Inline ...
1 - 5 pole terminal strip with5x20mm fuse ...
Description:
1 - 5 pole terminal strip with5x20mm fuse holder to IEC257 Interlocking fuse holder CFTBN/1 Anti-rotation spigot IP20 finger protection Cable entry 4mm²Standard 1 to 5 pole with earth screw, without wire protectors.
The Weidmuller terminal block is an A-series, 800V, ...
Description:
The Weidmuller terminal block is an A-series, 800V, tailored, AAP, potential distribution terminal block. It is ideal for surge current protection and central control voltage distribution. The new maxGUARD range enables potential distribution with integrated electronic load monitoring in the ...