LM324N/NOPB Texas Instruments, Precision, Op Amp, 1MHz, 5 → 28 V, 14-Pin MDIP

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

General Purpose Op Amps, LM Series

A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of both through hole and SMT packages. Many of the devices in the LM family of op-amps offer low power consumption and are able to operate with single supplies with input common mode voltages that includes ground.

Specificaties
Kenmerk Waarde
Amplifier Type Precision
Mounting Type Through Hole
Package Type MDIP
Power Supply Type Dual, Single
Number of Channels per Chip 4
Pin Count 14
Typical Single Supply Voltage 5 → 28 V
Typical Gain Bandwidth Product 1MHz
Typical Dual Supply Voltage ±12 V, ±15 V, ±3 V, ±5 V, ±9 V
Typical Slew Rate 0.5V/µs
Minimum Operating Temperature 0 °C
Maximum Operating Temperature +70 °C
Length 19.05mm
Width 6.35mm
Rail to Rail No
Typical Input Voltage Noise Density 40nV/√Hz
Typical Voltage Gain 100 dB
Height 3.3mm
Dimensions 19.05 x 6.35 x 3.3mm
Prijs Each (In a Tube of 25)
0,436
(excl. BTW)
0,528
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
25 - 100
€ 0,436
€ 10,90
125 - 475
€ 0,425
€ 10,625
500 - 1225
€ 0,414
€ 10,35
1250 +
€ 0,404
€ 10,10
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
Power operational amplifiers from Texas Instruments with high ...
Description:
Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs ...
Power operational amplifiers from Texas Instruments with high ...
Description:
Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs ...
A range of Texas Instruments current-differencing (Norton) operational ...
Description:
A range of Texas Instruments current-differencing (Norton) operational amplifiers which can be used in most conventional op-amp applications where the inputs are currents rather than voltages. Outputs are of the standard voltage source/sink type and the devices are ideally suited ...
LM137000 and OPA860/861 Operational Transconductance Amplifiers (OTAs) from ...
Description:
LM137000 and OPA860/861 Operational Transconductance Amplifiers (OTAs) from Texas Instruments. Operational Transconductance Amplifiers produce an output current proportional to a differential input. The transconductance, or gain, of the OTA can be controlled via a current which makes the devices suitable ...