LM675T/NOPB Texas Instruments, Power, Op Amp, 5.5MHz, 18 → 28 V, 5-Pin TO-220

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

High Voltage & High Current Op Amps

Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs and power transistors, bridge amplifiers, motor speed controllers, servo amplifiers, power supplies and uses within instrument systems.

Specificaties
Kenmerk Waarde
Amplifier Type Power
Mounting Type Through Hole
Package Type TO-220
Power Supply Type Dual, Single
Number of Channels per Chip 1
Pin Count 5
Typical Single Supply Voltage 18 → 28 V
Typical Gain Bandwidth Product 5.5MHz
Typical Dual Supply Voltage ±12 V, ±15 V, ±18 V, ±24 V, ±28 V, ±9 V
Typical Slew Rate 8V/µs
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Typical Input Voltage Noise Density 16nV/√Hz
Dimensions 10.16 x 4.57 x 8.64mm
Length 10.16mm
Height 8.64mm
Width 4.57mm
Rail to Rail No
Typical Voltage Gain 90 dB
Prijs Each (In a Tube of 45)
4,258
(excl. BTW)
5,152
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
45 - 180
€ 4,258
€ 191,61
225 - 405
€ 3,485
€ 156,825
450 +
€ 3,267
€ 147,015
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
Precision operational amplifiers from Texas Instruments Burr Brown ...
Description:
Precision operational amplifiers from Texas Instruments Burr Brown OPA series are suitable for demanding applications requiring high accuracy and low parametric drift with time and temperature. Typical applications include transducer and strain gauge amplifiers, precision integrators, active filters and high ...
A range of general purpose operational amplifiers from ...
Description:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of ...
A range of Texas Instruments current-differencing (Norton) operational ...
Description:
A range of Texas Instruments current-differencing (Norton) operational amplifiers which can be used in most conventional op-amp applications where the inputs are currents rather than voltages. Outputs are of the standard voltage source/sink type and the devices are ideally suited ...
A range of general purpose operational amplifiers from ...
Description:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of ...