OPA548T Texas Instruments, Power, Op Amp, 1MHz, 9 → 28 V, 7-Pin TO-220

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

High Voltage & High Current Op Amps

Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs and power transistors, bridge amplifiers, motor speed controllers, servo amplifiers, power supplies and uses within instrument systems.

Specificaties
Kenmerk Waarde
Amplifier Type Power
Mounting Type Through Hole
Package Type TO-220
Power Supply Type Dual, Single
Number of Channels per Chip 1
Pin Count 7
Typical Single Supply Voltage 8 → 60 V
Typical Gain Bandwidth Product 1MHz
Typical Dual Supply Voltage ±12 V, ±15 V, ±18 V, ±24 V, ±28 V, ±5 V, ±9 V
Typical Slew Rate 10V/µs
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Height 4.6mm
Width 8.34mm
Length 10.16mm
Rail to Rail No
Typical Voltage Gain 98 dB
Typical Input Voltage Noise Density 90nV/√Hz
Dimensions 10.16 x 8.34 x 4.6mm
550 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 50)
11,287
(excl. BTW)
13,657
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
50 - 200
€ 11,287
€ 564,35
250 - 450
€ 9,563
€ 478,15
500 +
€ 8,951
€ 447,55
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
The Texas Instruments TL060 series are low-power JFET-input ...
Description:
The Texas Instruments TL060 series are low-power JFET-input Op Amps that offer good performance with a significant reduction in power consumption over the TL080 family.
A range of general purpose operational amplifiers from ...
Description:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of ...
The Texas Instruments TL060 series are low-power JFET-input ...
Description:
The Texas Instruments TL060 series are low-power JFET-input Op Amps that offer good performance with a significant reduction in power consumption over the TL080 family.
A range of general purpose operational amplifiers from ...
Description:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of ...