OP400GPZ Analog Devices,, Op Amp, 500kHz, 14-Pin PDIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

OP77/200/400 Precision Op Amps, Analog Devices

The OP77 precision op amp from Analog Devices features ultra-low offset voltage and drift together with outstanding gain linearity. The OP200 and OP400 versions offer similar precision performance in space saving Dual and Quad packages.

Operational Amplifiers, Analog Devices

Specificaties
Kenmerk Waarde
Mounting Type Through Hole
Package Type PDIP
Power Supply Type Dual
Number of Channels per Chip 4
Pin Count 14
Typical Gain Bandwidth Product 500kHz
Typical Dual Supply Voltage ±12 V, ±15 V, ±18 V, ±5 V, ±9 V
Typical Slew Rate 0.15V/µs
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Rail to Rail No
Width 6.35mm
Height 3.3mm
Length 19.05mm
Dimensions 19.05 x 6.35 x 3.3mm
Typical Input Voltage Noise Density 22nV/√Hz
Typical Voltage Gain 137 dB
47 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
14,19
(excl. BTW)
17,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 12
€ 14,19
13 +
€ 13,02
Verpakkingsopties
Related Products
The Analog Devices OP07, OP27 and OP37 family ...
Description:
The Analog Devices OP07, OP27 and OP37 family of precision operational amplifiers feature very low input offset voltages, high open loop gain and very low noise. These devices are ideal for high gain instrumentation applications where high precision and good ...
Low offset voltage: 50 μV maxLow input bias ...
Description:
Low offset voltage: 50 μV maxLow input bias current: 1 pA maxSingle-supply operation: 1.8 V to 5 VLow noise: 22 nV/vHzMicropower: 50 μA maxLow distortionNo phase reversalUnity gain stableApplicationsBattery-powered instrumentationMultipole filtersSensorsLow power ASIC input or output amplifiers.
A range of low noise operational amplifiers from ...
Description:
A range of low noise operational amplifiers from Analog Devices suitable for applications involving low-level inputs and high gains where noise generation must be minimized. In addition, these low noise devices generally have lower levels of distortion than most general ...
A range of JFET input Op Amps from ...
Description:
A range of JFET input Op Amps from Analog Devices suitable for operation from single rail power supplies. The input common mode range of these operational amplifiers includes ground (or the negative supply rail with dual supplies) and most of ...