LM324N/NOPB Texas Instruments, Precision, Op Amp, 1MHz, 5 → 28 V, 14-Pin MDIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

General Purpose Op Amps, LM Series

A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of both through hole and SMT packages. Many of the devices in the LM family of op-amps offer low power consumption and are able to operate with single supplies with input common mode voltages that includes ground.

Specificaties
Kenmerk Waarde
Amplifier Type Precision
Mounting Type Through Hole
Package Type MDIP
Power Supply Type Dual, Single
Number of Channels per Chip 4
Pin Count 14
Typical Single Supply Voltage 5 → 28 V
Typical Gain Bandwidth Product 1MHz
Typical Dual Supply Voltage ±12 V, ±15 V, ±3 V, ±5 V, ±9 V
Typical Slew Rate 0.5V/µs
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Rail to Rail No
Width 6.35mm
Height 3.3mm
Typical Voltage Gain 100 dB
Dimensions 19.05 x 6.35 x 3.3mm
Typical Input Voltage Noise Density 40nV/√Hz
Length 19.05mm
Prijs Each
1,93
(excl. BTW)
2,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 1,93
10 - 49
€ 0,79
50 - 99
€ 0,73
100 - 199
€ 0,65
200 +
€ 0,58
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
Power operational amplifiers from Texas Instruments with high ...
Description:
Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are capable of operating at higher supply voltages than general purpose op amps. Typical applications include driving MOSFETs ...
Linear Technology high current buffers and power operational ...
Description:
Linear Technology high current buffers and power operational amplifiers have increased output current capacity making them suitable for driving demanding loads. They can be used as stand-alone buffers and amplifiers, or to boost the output current of conventional op amps ...
The Analog Devices OP07, OP27 and OP37 family ...
Description:
The Analog Devices OP07, OP27 and OP37 family of precision operational amplifiers feature very low input offset voltages, high open loop gain and very low noise. These devices are ideal for high gain instrumentation applications where high precision and good ...
A range of current feedback operational amplifiers from ...
Description:
A range of current feedback operational amplifiers from Analog Devices. Op amps employing current feedback topology are capable of better high frequency performance than voltage-mode devices and are ideally suited to high speed and video applications where DC accuracy requirements ...