Infineon Photocoupler, Max. Input 25 mA, 8.63mm Length, Through Hole Mounting Style

  • RS-stocknr. 165-5775
  • Fabrikantnummer PVT312LPBF
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

Transistor Output - FET & MOSFET, Infineon

The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction.

Bounce-Free Operation
1010 Off-State Resistance
1,000 V/μsec dv/dt
5 mA Input Sensitivity
4,000 VRMS I/O Isolation
Solid-State Reliability

Optocouplers, International Rectifier

tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tube of 50)
2,188
(excl. BTW)
2,647
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
50 +
€ 2,188
€ 109,40
*prijsindicatie
Related Products
11-mm creepage and 10.5-mm clearancePositive output type (totem ...
Description:
11-mm creepage and 10.5-mm clearancePositive output type (totem pole output)Truth table guaranteed: Vcc from 4.5V to 30VPerformance specified for common IPM applications over industrial temperature rangeLED drive current: 12mA (min)Minimum 50 kV/μs high common-mode rejection at VCM = 1500 VLow ...
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
These DIN rail mount opto-couplers from Phoenix Contact ...
Description:
These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment ...