Broadcom, ACPL-227-500E DC Input Transistor Output Dual Optocoupler, Surface Mount, 8-Pin SOIC

  • RS-stocknr. 693-6784
  • Fabrikantnummer ACPL-227-500E
  • Fabrikant Broadcom
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Optocoupler, Transistor Output, Avago Technologies

The DC input single and multi-channel phototransistor optocouplers are used for power sequence controller and Input/Output interface applications.

Optocouplers, Avago Technologies

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Output Device Transistor
Maximum Forward Voltage 1.4V
Number of Channels 2
Number of Pins 8
Package Type SOIC
Input Current Type DC
Typical Rise Time 2µs
Maximum Input Current 50 mA
Isolation Voltage 3 kVrms
Maximum Current Transfer Ratio 600%
Typical Fall Time 3µs
Minimum Current Transfer Ratio 50 %
460 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
800 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,716
(excl. BTW)
0,866
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 15
€ 0,716
€ 3,58
20 - 95
€ 0,476
€ 2,38
100 - 495
€ 0,36
€ 1,80
500 - 995
€ 0,342
€ 1,71
1000 +
€ 0,334
€ 1,67
*prijsindicatie
Verpakkingsopties
Related Products
The ICPL3120 consists of an Infrared Light Emitting ...
Description:
The ICPL3120 consists of an Infrared Light Emitting Diode optically coupled to an Integrated Circuit with a Power Driving Output. ICPL3120 is ideally suitable to drive the Power IGBT and MOSFET in Inverters of Motor Controls and in Power Supplies. ...
The Broadcom optocoupler is an ACPL-C79B series precision ...
Description:
The Broadcom optocoupler is an ACPL-C79B series precision miniature isolation amplifier. It is designed for current and voltage sensing in electronic power converters in applications including motor drives and renewable energy systems. In a typical motor drive implementation, current flows ...
This range of optocouplers with darlington output, from ...
Description:
This range of optocouplers with darlington output, from Avago Technologies, offer a high current transfer ratio with low input current requirements. The optocoupler devices use light emitting diodes (LEDs) optically coupled with integrated high gain photodetectors. They provide excellent input-output ...
Package: SO8Operating temperature: -40 to 100 °CCurrent transfer ...
Description:
Package: SO8Operating temperature: -40 to 100 °CCurrent transfer ratio: 400 % (min) @IF = 0.5 mAMaximum output current: 60 mAPropagation delay time: tpHL = 2 μs (typ.), tpLH = 4 μs (typ.) @ RL = 4.7 kΩ, IF = 0.5 ...