Gate Drive Optocoupler,LF

  • RS-stocknr. 188-6470
  • Fabrikantnummer ACNU-4804-000E
  • Fabrikant Broadcom
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

11-mm creepage and 10.5-mm clearance
Positive output type (totem pole output)
Truth table guaranteed: Vcc from 4.5V to 30V
Performance specified for common IPM applications over industrial temperature range
LED drive current: 12mA (min)
Minimum 50 kV/μs high common-mode rejection at VCM = 1500 V
Low propagation delay, TPLH / TPHL: 120ns / 150ns (max)
Minimized Pulse Width Distortion (PWD)
Compact, auto-insertable SSO8 package
Industrial temperature range: -40°C to 105°C
High speed: 10MBd typ
Hysteresis

Applications
IPM (Intelligent Power Module) interface isolation
Isolated IGBT/MOSFET gate drive
AC and brushless DC motor drives
Industrial inverters
General digital isolation

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 1.85 V
Maximum Input Current 20 mA
Isolation Voltage 5000 (Minimum)Vrms
Rise Time 6ns
Pin Count 8
Mounting Style Surface Mount
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
Length 9.6mm
Width 6.24mm
Depth 3.607mm
Operating Temperature Range -40 → +105 °C
Input Type LED
Output Type Positive (Totem Pole)
Dimensions 9.6 x 6.24 x 3.607 mm
1920 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 80)
1,892
(excl. BTW)
2,289
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
80 - 80
€ 1,892
€ 151,36
160 - 240
€ 1,794
€ 143,52
320 - 560
€ 1,706
€ 136,48
640 - 720
€ 1,553
€ 124,24
800 +
€ 1,486
€ 118,88
*prijsindicatie
Related Products
The PDV13 series from Infineon is a single ...
Description:
The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic ...
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...