Phoenix Contact Optocoupler, Max. Forward 5 V, Max. Input 7 mA, 80mm Length, DIN Rail Mounting Style

Wetgeving en compliance
Niet conform
Land van herkomst: CN

Phoenix Contact Opto-Couplers with Solid State Relay Output

These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available
• Versions with switching speeds up to 100kHz available
• 2.5kVac input to output isolation
• LED status indication
• Module width 6.2mm
• Operating temperature range: -20 to +60°C


IEC 60 664, IEC 60 664A, DIN VDE 0110


An Input solid-state relay for DIN rail mounting, with yellow LED display and includes signal inputs on PLC counter boards.

Features and Benefits

• Reverse polarity and surge protection
• Screw connection
• Capacitor on the input side for interference suppression
• M3 thread

Kenmerk Waarde
Maximum Forward Voltage 5 V
Maximum Input Current 7 mA
Isolation Voltage 2.5kV
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 80mm
Width 6.2mm
Depth 56mm
Series DEK-OE-5DC/24DC/100KHZ
Operating Temperature Range -20 → +60 °C
Dimensions 56 x 6.2 x 80 mm
29 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
98 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 39,13