Phoenix Contact Optocoupler, 80mm Length, DIN Rail Mounting Style

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact Opto-Couplers with Solid State Relay Output

These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available
• Versions with switching speeds up to 100kHz available
• 2.5kVac input to output isolation
• LED status indication
• Module width 6.2mm
• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

Specificaties
Kenmerk Waarde
Isolation Voltage 2.5kV
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 80mm
Width 6.2mm
Depth 56mm
Series DEK-OV- 12DC/24DC/3
Operating Temperature Range -20 → +60 °C
34 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
50,69
(excl. BTW)
61,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 50,69
Related Products
Symmetrical housing 6.2 mm narrowFor applications of miniature ...
Description:
Symmetrical housing 6.2 mm narrowFor applications of miniature electronicsAvailable with spring-loaded or screw connection technology (SP/SC)Transparent front cover can be swivelled, rotated and markedQuick assembly using snap-in parts8-pin.
The PDV13 series from Infineon is a single ...
Description:
The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic ...
11-mm creepage and 10.5-mm clearancePositive output type (totem ...
Description:
11-mm creepage and 10.5-mm clearancePositive output type (totem pole output)Truth table guaranteed: Vcc from 4.5V to 30VPerformance specified for common IPM applications over industrial temperature rangeLED drive current: 12mA (min)Minimum 50 kV/μs high common-mode rejection at VCM = 1500 VLow ...
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...