LeCroy HVFO-2M-FIBER Test Probe Extension Set, For Use With HVFO Isolated Probe

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Teledyne LeCroy HVFO103 60MHz High Voltage Fibre Optically Isolated Probe and Accessories

The Teledyne LeCroy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the probe tip and the oscilloscope input reduces adverse loading of a device under test. It also reduces noise, distortion, ringing, overshoots, and transients on the measured signal. It far surpasses the measurement capabilities and signal fidelity of both conventional HV differential probes and acquisition systems that rely on galvanic channel-to-channel and channel-to-ground high voltage isolation. Furthermore, it mitigates reliance on dangerous test setups that require floating the oscilloscope and probe, or investments in specialized isolated oscilloscope or data acquisition systems that result in other performance compromises.
The HVFO103 architecture is simple, with a single laser and fibre optic cable providing optical isolation and modulated signal + data communication. Selectable tips are available for various operating voltage ranges. The HVFO103 is small enough to fit in tight spaces, provides the performance required for real-world needs, and is affordable enough to accommodate tight equipment budgets.

Features and Benefits

60 MHz bandwidth
Common-mode (safety) voltage virtually unlimited (optical isolation)
Superior Noise and Rejection
140 dB CMRR
Low loop inductance
Low attenuation
Reduced DUT loading, better pulse response compared to conventional HV differential probes
Selectable tips for from +/-1V to +/-40V
Eliminates need to "float" the oscilloscope
ProBus-compatible with many Teledyne LeCroy oscilloscopes Attenuating tips, fibre optic cable accessories and spare amplifier modulating transmitters are available separately, see below.

HVFO100 Attenuating tips:

136-8323: 1X attenuation 136-8325: 5X attenuation
136-8324: 20X attenuation

HVFO-FIBER Fibre optic cable accessories:

136-8326: 1 metre 136-8327: 2 metre
136-8328: 6 metre

Note

Spare HVFO103-XMITTER amplifier/modulating transmitters are available, please see RS 136-8331. Having a spare permits constant operation - charge one while the other is being used.

Supplied with

1 x Amplifier/modulating transmitter, 1 x demodulating receiver, 1.1 metre fibre optic cable, 1 x USB charing cable and 1 x micro gripper set.

Specificaties
Kenmerk Waarde
Accessory Type 2 m Fiber Optic Cable Accessory
For Use With HVFO Isolated Probe
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-03-2020, met een levertijd van 1 werkdag.
Prijs Each
170,00
(excl. BTW)
205,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 170,00
Related Products
Offering up to 200 MHz bandwidth and 1 ...
Description:
Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the MSO2000B Mixed Signal Oscilloscope Series from Tektronix delivers advanced debug features at an entry-level price. Users can quickly find and diagnose problems in complex designs with up to ...
The RS Pro HF accessory kit is suitable ...
Description:
The RS Pro HF accessory kit is suitable for the RS Pro 2.5mm oscilloscopes probes, series RS-HF 600.The set consists of 27 pieces and each single items very compact design is ideal for measurement of SMT components. 1466619 (RS-HF 612)1466620 ...
The Fluke oscilloscope probes is a shaft voltage ...
Description:
The Fluke oscilloscope probes is a shaft voltage measurement kit. It is designed for the use of MDA-500 series motor drive analyser. It has three carbon fibre brushes, a probe holder with extension rods and magnetic base for securely mounting ...
The Pico TA050 attenuator set consists of 4 ...
Description:
The Pico TA050 attenuator set consists of 4 coaxial attenuators designed for use with signals up to 1GHz. Each attenuator has a male and a female BNC connector. Bandwidth DC to 1GHzAttenuation 3, 6, 10, 20 dBMaximum power dissipation 1WInput ...