LeCroy Coaxial Cable 50 (DC Resistance) kΩ

Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: US
Productomschrijving

Teledyne LeCroy RP4000-MCX Coaxial Test Lead

The Teledyne LeCroy RP4030 Power Rail Probe meets the specific requirements of those who need to acquire a low-voltage DC signal.The RP4030 will faithfully acquire a low-impedance, low-voltage DC power/voltage rail signal without unduly loading the device under test (DUT), while providing high offset to allow DC power/voltage rail signal display on an oscilloscope with high gain. The RP4000-MCX-LEAD-SI is a quantity (3) 4 GHz solder-in lead accessories (additional to those supplied with RP4030), 18cm long

Features and Benefits

  • Comprehensive power integrity, digital power management IC (PMIC), voltage regulator module (VMR), point-of-load (POL) switching regulator, or low-dropout regulator testing

  • Complete embedded power management system that includes PMICs, VRMs, POLs, and LDOs

  • Low offset range - +/-30V offset permits the DC signal to be displayed in the vertical center of the oscilloscope grid with a high-sensitivity gain setting (maximum +/-800mV dynamic range).

  • High DC Input Impedance - 50 kΩ input impedance at DC effectively eliminates probe loading on the DC power/voltage rail and provides for more accurate measurements and signal fidelity.

  • 4 GHz of Bandwidth - Provides maximum bandwidth for probing near the CPU, and the perfect match with the 4 GHz, 10 bit HDO9404 when making power integrity measurements.

Applications

  • Automotive

  • Power Applications

  • Motor Drive Development

  • Product Design Applications

Specificaties
Kenmerk Waarde
Accessory Type MCX 4 GHz Solder-in Leads
For Use With RP4030 Voltage Rail Probe
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-04-2020, met een levertijd van 1 werkdag.
Prijs Each
535,00
(excl. BTW)
647,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 535,00
Related Products
Micro coaxial cable is an ideal space saving ...
Description:
Micro coaxial cable is an ideal space saving solution. Application routing becomes so much easier in areas such as medical probes, endoscopy systems, oximetry systems and industrial inspection. • Ideal for areas with limited space• High strength silver plated, tinned ...
The D38N (insulated AC current probe) offers accurate ...
Description:
The D38N (insulated AC current probe) offers accurate AC current measurement and a voltage output in mV allowing direct readings on oscilloscopes.A switch with 3 positions on the handle can be used to select the ranges.The wide opening of the ...
The Teledyne LeCroy RP4030 Power Rail Probe meets ...
Description:
The Teledyne LeCroy RP4030 Power Rail Probe meets the specific requirements of those who need to acquire a low-voltage DC signal.The RP4030 will faithfully acquire a low-impedance, low-voltage DC power/voltage rail signal without unduly loading the device under test (DUT), ...
One of the advantages of using Teledyne LeCroy ...
Description:
One of the advantages of using Teledyne LeCroy passive probes is the large number of accessories available from RS for use with these probes. Examples include clips, hooks, adapters, springs and ground leads. These accessories are designed for use with ...