Tektronix TCPA300 Oscilloscope Probe Amplifier, For Use With TCPA300 AC/DC Measurement System

  • RS-stocknr. 764-4391
  • Fabrikantnummer TCPA300
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Tektronix TCPA300 Amplifier

The Tektronix TCPA300 amplifier is designed for use with the Tektronix TCP312 (30A) or TCP305 (50A) current probe. These probe/amplifier combinations offer a wide current measurement capability, from low-level milliamp measurements to high current levels. The TCPA300 can also be used with non-TEKPROBE systems to make proper current measurements, by multiplying the measured output voltage on the oscilloscope by the TCPA300 range setting.

Note

Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.

Supplied with

Instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50Ω), 50Ω feedthrough termination, Certificate of Traceable Calibration

Tektronix Oscilloscope Probe Amplifier

The Tektronix TCPA300 oscilloscope probe amplifier is a highly advanced current measurement system. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC) or TekVPI (w/TPA-BNC) interfaces offer a wide current measurement capability, from low-level milliamp measurements to high current levels. It can also be used with non-Tekprobe systems to make proper current measurements, by multiplying the measured output voltage on the oscilloscope by the TCPA300 range setting.
Note:
Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.
Supplied with instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50O), 50O feedthrough termination, Certificate of Traceable Calibration.

Features and Benefits

• DC to 100MHz: Current Probe Amplifier
• Automatic scaling and units 1 - Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations
• AC/DC input coupling
• Low insertion impedance reduces device under test loading
• Split-core construction allows easy circuit connection
• Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohm, no compatible probe type
• Lower DC drift and noise allow improved low level current measurements

Applications

• Development and analysis solutions for designers, installers, and service personnel in telecomm, data communication, computer and semiconductor power electronics environments for
• Power supplies (switching and linear)
• Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
• Power inverters/converters
• Electronic ballasts
• Industrial/consumer electronics
• Mobile communications (phone, satellite and relay stations)
• Motor drives transportation systems (electronic vehicles, electric trains, locomotives and avionics)

Certifications

• UL3111-2-032 UL3111-1 certified
• EN61010-1/A2 certified
• IEC61010-1/A2 certified

Note

Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.

Supplied with

Instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50Ω), 50Ω feedthrough termination, Certificate of Traceable Calibration

Specificaties
Kenmerk Waarde
Accessory Type Amplifier
For Use With TCPA300 AC/DC Measurement System
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
2.870,00
(excl. BTW)
3.472,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.870,00
Related Products
The Teledyne LeCroy HVFO103 (RS 136-8330) is a ...
Description:
The Teledyne LeCroy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the probe ...
The Fluke oscilloscope probes is a shaft voltage ...
Description:
The Fluke oscilloscope probes is a shaft voltage measurement kit. It is designed for the use of MDA-500 series motor drive analyser. It has three carbon fibre brushes, a probe holder with extension rods and magnetic base for securely mounting ...
THS3000 series handheld oscilloscopes provide bench performance in ...
Description:
THS3000 series handheld oscilloscopes provide bench performance in a compact and portable package. They offer true portability and battery operation, optimising their use for both bench design and field test. THS3000 key applications include design and debug of electronic systems, ...
One of the advantages of using Teledyne LeCroy ...
Description:
One of the advantages of using Teledyne LeCroy passive probes is the large number of accessories available from RS for use with these probes. Examples include clips, hooks, adapters, springs and ground leads. These accessories are designed for use with ...