LeCroy PK30X-1 Test Probe Clip, For Use With LeCroy Oscilloscope Probe

  • RS-stocknr. 789-8277
  • Fabrikantnummer PK30X-1
  • Fabrikant LeCroy
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Teledyne LeCroy Accessories for ADP30X High Voltage Active Differential Probes

One of the advantages of using Teledyne LeCroy differential probes is the large number of accessories available from RS for use with these probes. Examples include plunger hook clips, plunger jaw clips and plunger clamp clips. These are designed for use with Teledyne LeCroy ADP30X high voltage active differential probes including ADP305 ( 724-0905 ).

Specificaties
Kenmerk Waarde
Accessory Type Red and Blue Banana Hook Clip
For Use With LeCroy Oscilloscope Probe
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
35,00
(excl. BTW)
42,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,00
Related Products
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation ...
Description:
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation trimmerCable length 1.2m Termination 50Ω BNCVoltage category IEC1010-2-031 300V Cat 1Test voltage 1150VFor accessories kit ( 1 screw driver, 1 BNC adaptor, 1 ground lead, 1 test clip, 1 needle ) see ...
Bandwidth 500 MHzProbe Ratio 10:1Cable Length 1.2 metersInput ...
Description:
Bandwidth 500 MHzProbe Ratio 10:1Cable Length 1.2 metersInput Impedance 10 MOhmCapacitance 12 pFApprox. Rise Time 3 nsMax. Voltage 1000 V CAT III / 600 V CAT IVCompensation Range 10 to 22 pFSafety Rating 1000 V CAT III / 600 V ...
Rated voltage of probe:. Highly flexible 1.2m coaxial ...
Description:
Rated voltage of probe:. Highly flexible 1.2m coaxial cable with BNC plugCompensation adjusting screwø 2 mm safety socket for reference connectionIsoprobe® II 10:1 450MHz probePush-on hook clip with additional reference lead (600 V, CAT II)Push-on BNC plug (500 V, CAT ...
This unique probe is designed with two eight-channel ...
Description:
This unique probe is designed with two eight-channel pods and simplifies the process of connecting to the DUT. The P6316 can connect directly to 8x2 square pin headers spaced on tenth-of-an-inch centres. When more attachment flexibility is required, the included ...