Pico Technology PR121 Thermocouple Terminal Board

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Pico USB TC-08 Single Channel Terminal Board PR121

This Pico single-channel terminal board plugs into a channel on the Pico TC-08 data logger ( 492-5105 ) and turns it into a 20-bit high resolution data logger. Screw terminals enable wires to be attached to the data logger without soldering. The four input ranges (±50mV, ±500 mV, ±5 V and 4–20 mA) allow a wide range of other sensors and signals to be measured.

Pico Technology Thermocouple Terminal Board

The Pico Technology single-channel thermocouple terminal board allows wires to be attached to the data logger without soldering. The four input ranges (±50mV, ±500 mV, ±5 V and 4–20 mA) allow a wide range of other sensors and signals to be measured. The terminal board is designed to use with the USB TC-08 and is not guaranteed to work with other thermocouple data loggers. It plugs into a channel on the Pico TC-08 data logger and turns it into a 20-bit high-resolution data logger.

Features and Benefits

Specificaties
Kenmerk Waarde
Accessory Type Thermocouple Data Logger
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,00
(excl. BTW)
31,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 26,00
Related Products
Weatherproof modular enclosures containing 1 to 4 rows, ...
Description:
Weatherproof modular enclosures containing 1 to 4 rows, can accommodate 12 to 72 modules of 18 mm.Enclosure in light grey RAL 7035 and transparent green door.Each enclosure includes: set of snap-on base/front face hinges, marker kit, wire strap, terminal support, ...
The N2784A single arm probe positioner (134-6160) and ...
Description:
The N2784A single arm probe positioner (134-6160) and N2785A 2-arm probe positioner (134-6162) provide quick and stable X-Y positioning with only a “lift and drop” motion to put the probe in place for PC boards and devices that require hands-free ...
These probes feature a shrouded 4 mm socket ...
Description:
These probes feature a shrouded 4 mm socket allowing connection to a measurement instrument using a 4 mm "banana" plug test lead. The sprung hook opens up to 10 mm to hold items such as components, IC legs or small ...
The Teledyne LeCroy HVFO103 (RS 136-8330) is a ...
Description:
The Teledyne LeCroy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the probe ...