RS PRO Oscilloscope Probe, Probe Type: Differential, High Voltage 70MHz 1.5kV

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RS Pro 70 MHz High Voltage Differential Probe RSDPB5150

Bandwidth DC-70 MHz
Rise time ≤5 ns
DC accuracy ±2%
Attenuation ratio 50 X/500 X
Maximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 V
Maximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATII
Input impedance single-ended to ground 5 MΩ, two inputs 10 MΩ
Input capacitance single-ended to ground <4 pF, two inputs <2 pF
CMRR: DC >80 dB; 100 kHz >60 dB; 1 MHz >50 dB
Propagation delay 18 ns ± 1 ns
Bandwidth limit ≥ -3 dB @ 5 MHz
Differential overvoltage detection level 50 X: ≥150 V, 500 X: ≥1500 V
Overload indicator(red light)
Overload alarm
Automatic save
Offset setting function
Terminate load 1 MΩ
Power supply USB 5 V/1 A adapter
Probe body dimensions 195 x 65 x 28 mm
Probe body weight approximately 188 g

Specificaties
Kenmerk Waarde
Probe Type Differential, High Voltage
Attenuation 1:50, 1:500
Bandwidth 70MHz
Maximum Common Mode Input Voltage 1.5kV
Number of Probes 1
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
795,60
(excl. BTW)
962,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 795,60
Related Products
The HVD3000A series of high voltage differential probes ...
Description:
The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...
New generation of low-cost single-ended active probes with ...
Description:
New generation of low-cost single-ended active probes with AutoProbe interface, compatible with Keysight's InfiniiVision and Infiniium families of oscilloscopes. These probes have the general-purpose, high-speed probing characteristics suitable for wide-ranging applications including digital system design, ...
These high-voltage differential probes are for making, safely ...
Description:
These high-voltage differential probes are for making, safely and accurately, floating measurements in power electronics circuits. They enable conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements (i.e. where neither point of measurement is at earth ground). Selectable ...