RS PRO Oscilloscope Probe, Probe Type: Passive 15 MHz, 150 MHz 600V

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

RS Pro Passive Oscilloscope Probes - RS-LF Series

RS Pro Passive Oscilloscope Probe RS-LF Series. Ergonomically designed probe suitable for use with all major brands of oscilloscopes as well as our range. RS Pro passive oscilloscope probes don't require a power supply or batteries so are lightweight and easily portable.

Contents

• LF Oscilloscope Probe
• Protective caps
• Spring hook tip
• Spare probe tip
• Grounding lead terminated with insulated crocodile clip
• Trimmer tool

Probe Options

• RS - LF 112 = RS stock no: 146-6612 • RS - LF 212 = RS stock no: 146-6613
• RS - LF 312 = RS stock no: 146-6614
• RS - LF 312-2-6 = RS stock no: 146-6615 (2 pieces RS LF-312)

Attenuation Ratio

• 1:1 max. Input voltage 400 V CAT I (VDC + Peak AC) derating with frequency • 10:1 max. Input voltage 600 V CAT I (VDC + Peak AC) derating with frequency

RS PRO Oscilloscope Probes

The RS PRO passive oscilloscope probe is ergonomically designed and is suitable for use with all the major brands of oscilloscopes as well as our range. This probe does not require a power supply or batteries. Hence it is lightweight and easily portable. It comes with a fixed 10:1/1:1 attenuation, bandwidth up to 150MHz and is designed for measurements up to 600V.
Contents
• LF Oscilloscope Probe
• Protective caps
• Spring hook tip
• Spare probe tip
• Grounding lead terminated with insulated crocodile clip
• Trimmer tool
Probe Options:
RS - LF 312
Note
All the products in this range are supplied for use with instruments with a permanent earth connection.

Features and Benefits

• Bandwidth for 10:1/1:1 is 150MHz/15MHz
• Attenuation ratio is 10:1/1:1
• Input impedance for 10:1/1:1 is 10Mohmll 15.5pF/47pF
• Rise time for 10:1/1:1 is 2.3/24
• Maximum common mode input voltage is ±20V
• Max. input voltage is 600V CAT I (VDC + Peak AC)

Certifications

• CAT I

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specificaties
Kenmerk Waarde
Probe Type Passive
Attenuation 1:1, 1:10
Bandwidth 15 MHz, 150 MHz
Maximum Common Mode Input Voltage 600V
Connector Type BNC
Number of Probes 1
Safety Category Level CAT I
Safety Category Voltage 600V
Series RS-LF Series
Safety Category CAT I 600 V
Rise Time 2.3 ns, 24 ns
112 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
22,25
(excl. BTW)
26,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 22,25
Related Products
Pico TA152 is a useful adapter designed for ...
Description:
Pico TA152 is a useful adapter designed for connecting an oscilloscope probe tip directly to the BNC input of a DUT or source. This accessory is compatible with 2.5 mm scope probes: 350Hz and 500Hz high impedance (TA101, TA133, TA150); ...
When you use the oscilloscope in its usual ...
Description:
When you use the oscilloscope in its usual context to show and measure circuit shaft formations, you are working in the most common mode for voltage measurements. The differential probe enhances the oscilloscope probe's measuring capabilities with performance conversion, inverters, ...
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
Rated voltage of probe:. Highly flexible 1.2m coaxial ...
Description:
Rated voltage of probe:. Highly flexible 1.2m coaxial cable with BNC plugCompensation adjusting screwø 2 mm safety socket for reference connectionIsoprobe® II 10:1 450MHz probePush-on hook clip with additional reference lead (600 V, CAT II)Push-on BNC plug (500 V, CAT ...