RS PRO Oscilloscope Probe, Probe Type: Passive 300MHz 700V

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

RS PRO Oscilloscope Probe

The RS PRO RS-HV series passive oscilloscope probe is ergonomically designed and is suitable for use with all the major brands of oscilloscopes as well as our range. This probe does not require a power supply or batteries. Hence, it is lightweight and easily portable. It comes with a fixed 100:1 attenuation, bandwidth up to 300MHz and is designed for measurements up to 700V.
Probe Options:
• RS – HV 150
Contents:
• HV Oscilloscope Probe
• Protective caps
• BNC adapter
• Spring hook tip
• Spare probe tip
• Grounding lead terminated with insulated crocodile clip
• Trimmer tool
Note:
All the products in this range are supplied for use with instruments with a permanent earth connection.

Features and Benefits

• Bandwidth is DC to 300MHz
• Attenuation ratio is 100:1
• Input impedance is 100Mohmll 4pF
• Rise time is 1.2nS
• Input differential range ±20V
• Maximum common mode input voltage is ±700V
• 100:1 max. input voltage is 2500V CAT I (VDC + Peak AC)

Certifications

• CAT I

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specificaties
Kenmerk Waarde
Probe Type Passive
Attenuation 1:100
Bandwidth 300MHz
Maximum Common Mode Input Voltage 700V
Connector Type BNC
Number of Probes 1
Safety Category Level CAT I
Safety Category Voltage 2500V
Safety Category CAT I 2500 V
Rise Time 1.2ns
38 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
45,48
(excl. BTW)
55,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 45,48
Related Products
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Description:
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
When you use the oscilloscope in its usual ...
Description:
When you use the oscilloscope in its usual context to show and measure circuit shaft formations, you are working in the most common mode for voltage measurements. The differential probe enhances the oscilloscope probe's measuring capabilities with performance conversion, inverters, ...
The Testec is an active differential oscilloscope probe ...
Description:
The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC and 1400VAC/DC. ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...