Keysight Technologies N2791A Oscilloscope Probe, Probe Type: Differential 25MHz 700V

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Keysight High-voltage Differential Active Probes N2790A & N2791A

These high-voltage differential probes are for making, safely and accurately, floating measurements in power electronics circuits. They enable conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements (i.e. where neither point of measurement is at earth ground). Selectable attenuation settings make for highly versatile probes which come with tip accessories to facilitate working with large and small components in tight spaces.

Note

The N2790A has a differential amplifier in the probe head and an overrange indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000 Series (with version 5.26.0001 software), Infiniium 8000, 54830 Series (with version 5.7 software) and Infiniium 9000 Series (with version 2.0 software). Each of these scopes can support four N2790A probes.

Keysight Technologies Oscilloscope Probe

The Keysight Technologies N2791A oscilloscope probe offers conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 700V of differential voltage and common-mode voltage. It offers sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately. It also has an over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000 Series (with version 5.26.0001 software), Infiniium 8000, 54830 Series (with version 5.7 software) and Infiniium 9000 Series (with version 2.0 software). Each of these scopes can support four N2790A probes.
Supplied with alligator clips (2), hook clips (2), USB power cord 2m, 4 AA batteries, manual.

Features and Benefits

• Bandwidth is DC to 25MHz (–3dB)
• Attenuation ratio is 10:1/100:1
• Input impedance is 4Mohm ll10pF each side to ground
• Differential range is (10:1) ±70V (DC + peak AC)
• Maximum differential is (100:1) ±700V (DC + peak AC)
• Common mode range is ±700V (100:1) (DC + peak AC) or 70V (10:1)
• Absolute maximum voltage is 1000VRMS CAT III (1/100 & 1/1000)
• Offset (typical) is ±7.5mV
• Source input impedance is 1Mohm BNC interface
• AC CMRR (typical) is -80dB at 50/60Hz and -40dB at 1MHz
• Compatible with any oscilloscope with 1 MΩ BNC input
• Ambient operating temperature ranges between -10°C and 50°C
• Power requirement 4xAA cells

Certifications

• IEC61010-031
• CAT II 1000 VAC

Supplied with

alligator clips (2), hook clips (2), USB power cord 2m, 4 AA batteries, manual

Specificaties
Kenmerk Waarde
Probe Type Differential
Attenuation 1:10, 1:100
Bandwidth 25MHz
Maximum Common Mode Input Voltage 700V
Connector Type BNC
Model Number p N2791A
Safety Category Level CAT II
Safety Category Voltage 1000V ac
Series N
Safety Category CAT II 1000 V ac
Rise Time 14ns
18 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
612,00
(excl. BTW)
740,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 612,00
Related Products
The RS Pro RS-HF 612 passive oscilloscope probe ...
Description:
The RS Pro RS-HF 612 passive oscilloscope probe belongs to a new series of high performance 2.5mm diameter probes. This probe offer 500 MHz bandwidth and has a fixed attenuation of 10:1. The compact design is ideal for measurement of ...
RS Pro Passive Oscilloscope Probe RS-HV Series. Ergonomically ...
Description:
RS Pro Passive Oscilloscope Probe RS-HV Series. Ergonomically designed probe suitable for use with all major brands of oscilloscopes as well as our range. RS Pro passive oscilloscope probes don't require a power supply or batteries so are lightweight and ...
Solves three longstanding problems by providing: lower DUT ...
Description:
Solves three longstanding problems by providing: lower DUT loading (≤1 pF/1 MΩ probe loading); direct and easy access to SMDs; accesses DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths. Provides the electrical and ...
The P6139B and P5050B are high bandwidth, high ...
Description:
The P6139B and P5050B are high bandwidth, high impedance probes featuring a small probe head and sharp tip that make it easier to probe dense circuitry. The P6139B and P5050B share similar electrical specifications but support Tektronix oscilloscopes with different ...